Will this genny run a monojet machine

as above, please only answer if you are 100% sure of the answer

  • yes no problem

    Votes: 0 0.0%
  • no chance

    Votes: 0 0.0%
  • shut up you fat cont

    Votes: 0 0.0%

  • Total voters
    0
Status
Not open for further replies.
it would run it it, but how it would cope with start up each time is the biggest worry coz thats when u get the biggest power drain and u dont want that coz that will affect lots of things and cause probs
 
a mono only has one motor so it would run it what do they say rich im going to bed now just got in from work
 
Rich like ive mentioned before ive used the pft briggs and stratton genny(12.5kva) with a g5 and had no problems at all. Would have thought if the g5 is borderline but through experience has worked......your monojet without a starwheel motor or water pump to drain so much power would be even more a safe bet :)
 
ive got a minijet and a briggs 12.2kva genny and never had prob on start up start the genny then plug in machine
 
got briggs genny too , run a maltech m5 no problem also run a g5 off it ok. you d be better off spending the extra mate, you know you got a good genny and as long as you service regular it will last
 
Status
Not open for further replies.
Top