Weber silicone

[S a plastering]

Do weber do a 1.5 bucket coat for going over weber OCR cheers

 

[Arti]

Aye. TF150

 

[S a plastering]

Aye. TF150

Have you used it arti what's the coverage over OCR m2

 

[Rigsby]

Use plenty of primer. Ocr sucks.

 

[Arti]

Have you used it arti what's the coverage over OCR m2

About 5-6 m per bucket

 

[S a plastering]

Use plenty of primer. Ocr sucks.

Cheers rigs do you mean like a couple of coats mate what it is the job is for a mate top half of his house he wants a coulor but I don't want to krend to much mixing was going to rendAid with mesh then OCR an try a 1.5 top coat not really do any over OCR cheers

 

[S a plastering]

Or would hp12 be better

 

[Rigsby]

I have done plenty and W's ocr sucks in. Put at least 2 good coats of primer on. It can be anybody's bucket coat W's tf150 aint cheap.

Where are you based?

 

[Arti]

The PR310 aint cheap either

 

[S a plastering]

I have done plenty and W's ocr sucks in. Put at least 2 good coats of primer on. It can be anybody's bucket coat W's tf150 aint cheap.

Where are you based?

Manchester rigs

 

[Rigsby]

Manchester rigs

Pm sent

 

[Rigsby]

Pm sent

 

[S a plastering]

Cheers mate

 

[tottiman]

Hi rigs, does ocr sponge up smooth as good as s & c?

 

[Rigsby]

Hi rigs, does ocr sponge up smooth as good as s & c?

Usually better. Depends who's.

Some like Weber is very fine but then SAS's is course.

I prefer gritty for peace of mind, the fine stuff seems to suffer from slump cracks.

 

[kgreigh]

Usually better. Depends who's.

Some like Weber is very fine but then SAS's is course.

I prefer gritty for peace of mind, the fine stuff seems to suffer from slump cracks.

I have noticed this recently loads of fine horizontal cracks all over the area,it was on a job at a new lidl but looks ok now it's painted.

 

[plasterjfe]

If u want silicone make sure it says Weber sil tf
Weber plast tf is not silicone.

Decent gear smaller tubs about 6m a tub