weber/cement board

[Geddo]

Hi guys , i need a bit (a lot ) of advice please , the job is an external render using weber pral on top of render boards.
1. pink grip fil the beads on or use the weber?
2. do i need to put a backing coat on first i.e rend aid
or just one thick coat (hand applied)
They are only small panels around the bottom edge of the customer decking.

 

[owls]

Weber lac on the boards.

 

[S a plastering]

can you still mono over the weber lac or just thin coat system?

 

[Dansouthcoast84]

its not advisef to use mono on boards

 

[S a plastering]

its not advisef to use mono on boards[/QUOT

so how do I go on with the on ive got to price for a builder all new block then on the two apexes at the top cement board flush with the blockwork and they want mono tried telling em about thin coat but don't want to listen

 

[Geddo]

Hi guys , i need a bit (a lot ) of advice please , the job is an external render using weber pral on top of render boards.
1. pink grip fil the beads on or use the weber?
2. do i need to put a backing coat on first i.e rend aid
or just one thick coat (hand applied)
They are only small panels around the bottom edge of the customer decking.

Thanks , thought it would of been OK to render aid it first, but giving it some more thought I suppose there will be a fair amount of movement from said decking and I suppose the weight of the weber is a factor aswel, cheers anyway guys I'll tell him to clad it instead.

 

[markla]

do a thin coat system jobs a goodun