Tyrolean Finish

[Ffordun]

Having recently had an exterior feature wall rendered in K-REND by a 'professional' the finished coat is 'lumpy and bumpy' and I want to hide this by applying a tyrolean finish using a flick gun and the same K-REND Silicone FT. Will I need to apply a coat of PVA before applying the K-REND and if so do I need to apply it while the PVA is still sticky?
Any tips regarding the use of the flick gun would be helpful .
,

 

[bobski]

NO!!!

Dodge pva. Use sbr or maybe krends own bonding primer R10. Their equivalent of parex's micro.

Why can't you remove the existing and recoat?

 

[malc]

NO, you need as much suction as you can get for tyrolean.

 

[beddy]

I imagine Tryolean will stick like **** to a blanket over A substrate like mono

 

[Arti]

it does ste......................:RpS_thumbup:

 

[zombie]

Having recently had an exterior feature wall rendered in K-REND by a 'professional' the finished coat is 'lumpy and bumpy' and I want to hide this by applying a tyrolean finish using a flick gun and the same K-REND Silicone FT. Will I need to apply a coat of PVA before applying the K-REND and if so do I need to apply it while the PVA is still sticky?
Any tips regarding the use of the flick gun would be helpful .
,

so let me get this straight you had a plasterer in to k-rend they messed up so your now guna tyro it summet not right here!!!

me thinks you foooked the k-rend up like?????:RpS_sneaky: