simplybesty
Private Member
we got some skimming onto board using mp finish on a job in portsmouth, most high level but can be done off electric lift. must have cscs card. £2.35m2 labour only. PM me or monkey. start next week.
simplybesty said:we got some skimming onto board using mp finish on a job in portsmouth, most high level but can be done off electric lift. must have cscs card. £2.35m2 labour only. PM me or monkey. start next week.
flynnyman said:simplybesty said:we got some skimming onto board using mp finish on a job in portsmouth, most high level but can be done off electric lift. must have cscs card. £2.35m2 labour only. PM me or monkey. start next week.
A CSCS card? your jokin man i bin doin this job all me bloody life ive not needed one in the past and i'll not need one in the future...............................................pitty that im in portsmouth and could do with some work, bloody foreigners.![]()
grand wizard said:no most are not paying 1.80 braddons pay more than that![]()
simplybesty said:Nick, what you dont seem to understand this is how it is with sitework, were not talking about a 100m2 job, were talking about over 1200m2. its also all walls and no ceilings and when i say hight its not that bad. i have been doing a bit and you can do 60m2 a day easy and i have not been pushing. I did make a mistake, its 2.50m2 so a local skimmer would still earn a fair weeks money. Its also mp finish so you can get more on in a set. we would do it but were spraying the mp 75.
Rich, Prices are better down your way, but on the large sites its not good down there. i have priced some and turned it down because of the price they want it done for.
Im not looking for a debate on rates, if you dont want to do the job move on and read another post.
No im not i normally charge £4.00 per lm for beads however i just dropped to £3.00 on last quote and got itsimplybesty said:thats because you have to be able to plaster with speed and also do a good job, Most cant see the bigger picture and get on the books of firms who always try and pay a fair rate. machine plastering ltd always pay well , ask anyone who has worked for us. I only put it on here to offer it to lads who dont have the work . Render systems, your living in a dream bull(german word) world mate,
Render Systems said:No im not i normally charge £4.00 per lm for beads however i just dropped to £3.00 on last quote and got itsimplybesty said:thats because you have to be able to plaster with speed and also do a good job, Most cant see the bigger picture and get on the books of firms who always try and pay a fair rate. machine plastering ltd always pay well , ask anyone who has worked for us. I only put it on here to offer it to lads who dont have the work . Render systems, your living in a dream bull(german word) world mate,