sbr primer

[andy612]

can i put ka bond sbr onto crumbling engineering bricks as a primer to seal them before using ka tanking slurry

 

[The Hobo]

can i put ka bond sbr onto crumbling engineering bricks as a primer to seal them before using ka tanking slurry

be reet

 

[smoother09]

I don't see why not

 

[smoother09]

can i put ka bond sbr onto crumbling engineering bricks as a primer to seal them before using ka tanking slurry

But why not use SBR cement mix as a slurry what's the crack with the job? What you doing as a finish?

 

[smoother09]

can i put ka bond sbr onto crumbling engineering bricks as a primer to seal them before using ka tanking slurry

Rendaid is good s**t if your finishing in s&c and a bit easier to use than SBR as can be left when applied

 

[andy612]

Im going to put 2 coats of ka tanking slurry on then paint it, so should i put one coat of ka bond sbr, and while still tacky put the ka tanking slurry on, then when dry put another coat of ka tanking slurry on. will that stop the red engineering bricks from crumbling?

 

[lurpak]

be reet

 

[Topspread16]

Im going to put 2 coats of ka tanking slurry on then paint it, so should i put one coat of ka bond sbr, and while still tacky put the ka tanking slurry on, then when dry put another coat of ka tanking slurry on. will that stop the red engineering bricks from crumbling?

If they’re crumbling they’re not engineering bricks.

 

[andy612]

they have salt on them

 

[Topspread16]

they have salt on them

Plenty of vinegar

 

[The Hobo]

If they’re crumbling they’re not engineering bricks.

accrinton stock brick say no more