Vincey
Private Member
What last day you broke up now?Last day yesterday mate
What last day you broke up now?Last day yesterday mate
What last day you broke up now?
I only use board . I dont understand why people carry on using multi if they have problems with it
Been fine for me.
He done 5 cause he had a nightmare so cried of for xmas and passed it to a friend to get him put s**t lolHow many bags u throwing on a week
How many bags u throwing on a week
He done 5 cause he had a nightmare so cried of for xmas and passed it to a friend to get him put s**t lol
Obviously not loads, but prob been about 12 in last week. Bulk from Selco and a few from local merchant.
Obviously not loads, but prob been about 12 in last week. Bulk from Selco and a few from local merchant.
Seems to happen to some and not others. Think it’s just bad luck. It doesn’t happen often
I had a couple of dodgy bags a few months back doing what you describe.
On what background
Board
Yea mate. Got another spread doing my jobs next week. Had enough for 1 year
Their recommendations worth as much as the paper it's written onb*ll***s gypsum do not recommend board finish on anything else but recycled own boards, you know that lads right?
He text me and said multi was fine!
Couldn’t agree more mate! I would say they just copy and pasted it from somewhere else , without giving it a thoughtTheir recommendations worth as much as the paper it's written on
Little bedroom today should have been straight forward. The gears been fine for a bit then BANG, it’s shite again.
I thought I’d take the time to take a few pictures, to show the doubters just how s**t the gear (multi) can be.
This was laid down with a fresh mix too.
So put it on, fine, lay down with fresh gear, fine.
Go to flatten. Oh here we go. It’s pulling, ripping, tearing, streaky bacon the lot.
Some areas gone off, and next to it piss wet:
View attachment 29848
The 2.5 hour gauge turns into 4 when it like this, plus alot of anger.
So there you go. Think yourself lucky if it hasn’t happened to you. It’s not user error its s**t product.
@BritishGypsum what do you reckon? I’ve got half a bag of this horse s**t in van if you want to test it and tell me there’s nothing wrong with it
And before you say it essexandy rich richyrichy no i didn’t leave it like that.View attachment 29848View attachment 29849View attachment 29850View attachment 29851View attachment 29852
The gear is shiit in Blackpool aswell mate.....il still buy it because I can't keep up drinking with pricks that don't plaster for a living.
I'm off to the pub to get fuucking smashed mate xx
40th birthday
Wetting babas head
Christmas work do without the workers lol
Wish me luck xx
Of course you will, but you haven't used sponge yet. You'll find out next year
I’m open minded. I probably have had a go at some point.
Put on, lay down same mix, sponge the c**t. 2 trowels done?
Put on , flatten, fill here and there where is needed, no need for second coat, sponge, refina sexy3 ... home by 11:30 n your case .I’m open minded. I probably have had a go at some point.
Put on, lay down same mix, sponge the c**t. 2 trowels done?
@zombie out of curiosity how come you don’t rate the speedskim? Would have thought it would be perfect to close an area after sponging?
Put on , flatten, fill here and there where is needed, no need for second coat, sponge, refina sexy3 ... home by 11:30 n your case .
And you getting this out of me only because you settled down you arrogant carrot
Put on , flatten, fill here and there where is needed, no need for second coat, sponge, refina sexy3 ... home by 11:30 n your case .
And you getting this out of me only because you settled down you arrogant carrot
Yes I've warmed to our @lurpak he's been a big enough man to allow himself to be humbled!
I must seem like a dinasour to some on here but yet I'm under illusions I'm just a pup in knowledge to some forum legends such as @Rigsby @malc etc!
We all bring something to the table I've even seen my old apprentacises doing things after 1 month that I've thought good idea and taken on board!
You’ll get a finish you never done before, that’s why. Go to the private section and you’ll get the kick you after , not here so fancy poncy one coat wizz to play billy big balls gets the info he is after.I’m sure I’d figure it out salad but thanks.
I doubt one coat would suffice on re-skim?
Why flatten and fill, doesn’t sponge do that?
I do act a t**t sometimes but never big headed about my abilities, although I am confident.
Probably an age thing that I’m more open minded, i’ll try anything that might make my day quicker, actually pretty excited to try the sponge thing.
As for the speedskim, i only really use it on ceilings but do highly rate it. Possibly even better when laying in with same gear.
I’m thinking. Put on, lay down same mix. Sponge, speedskim. Go from there.
@zombie do you flatten and fill before sponge? Can’t see why you’d need to do that before spounge?
I’m sure I’d figure it out salad but thanks.
I doubt one coat would suffice on re-skim?
Why flatten and fill, doesn’t sponge do that?