RobJacks Venitian Plastering open day

Members online

Status
Not open for further replies.

Marshy

Private Member
Both myself and @SpankySouthport went to Applicart open day today in Darwen/Blackburn Lancashire and met @RobJack who is involved in the set up.
I never knew there were so many variations of this kind of work and the show room set up is fantastic. Also microcement is on offer and to see proper showroom examples of this kind of work as makes you realise how many possibilities there are for you to earn some decent money doing this kind of work!?
Courses are available to learn how to do this kind of work and for details your best asking @RobJack. Both myself and spanky are going to have a go as let's face it its another string to your bow so to speak!?
As it was an open day (tomorrow also) we had canopes on tap plus some champagne!! Served by lovely ladies who are great eye candy lads you will not be dissapointed!! If you can get to Blackburn/Darwen (junction 4 M65 at the services turn off) you will not only learn about something new and have your eyes opened how to make money in a different way!? Plus get a good eyefull off the ladies there :RpS_drool:
Get in touch with Robjack. Definatley worth it in my opinion.

PS @RobJack do I get free training for this post?? I'll make do with leftover champagne???
 
Last edited by a moderator:

bubbles65

Well-Known Member
I'm gonna be seriously disappointed if you of all people haven't got some pics Marshy :RpS_thumbup:
 

Marshy

Private Member
@bubbles65 here!!!
attachment.php
 
Last edited by a moderator:

BobbyJack

Well-Known Member
Was good to meet you two. Spanky is massive. Think its worth hiring a midget for the day just to stand next to him to amplify his size. Ivr got pics of the place and will put them on here later when I get to a computer. Didnt get any of Marshy and Spanky though. There were no TPF logos to pic anyway as @Danny pulled a sicky. Something about his stomach needed beer to get better so was sitting in pub all day :)
 
Last edited by a moderator:

Marshy

Private Member
Thanks Rob, your a good egg and really learned a lot from what you had to say about this kind of work plus got to oggle that lass coming up and down the stairs etc and when she was explaining what each canope was in her posh voice ! Well I nearly .... No wait hang on here!!! So both myself and spanky are keen to do the course so hopefully a few more members may have a nosey and join in too ??
 

jonnie

New Member
Hi guys sounds good what's the address & open times for the open day sounds interesting ,fancy doing a course also cheers
 

SpankySouthport

Private Member
Thanks @RobJack much appreciated :)

Very informative day, very impressed with the microcement used to do a full wet room looked very nice much better than tiling IMO.

Also impressed with the worktop finishes as well, a lot of decent products and unusual uses.

Well worth a visit gents if only for the blondy who was well up for it pint sized as well :D
 
Last edited by a moderator:

BobbyJack

Well-Known Member
Will get some course information this week for anyone wanting it. The lastday of the opening is tomorrow but the place is now officially open so I will double check times but pretty sure its 9-5 mon to fri. Will check out weekends. So anyone who turns up can see the training facility and the showroom area. The best thing about this setup is its also a distributor for the products you get trained on. So you can buy all stock from the place when you get any jobs. Also something that Marshy was concerned about was after the course. If you do the training and then need a little more info on something or forget a product process etc John myself and the team is at the end of the phone ir you can call in anytime and we can advise on whatever your stuck with
 

BobbyJack

Well-Known Member
Sorry mate. Just seen your post. It was 10 -4. But it will be open from monday all day. Soanyone can call in anytime they like to look around the showroom and training facility
 

BobbyJack

Well-Known Member
finally got to a pc so here are some pics of the opening. I didnt take many

MDF table top coated in microcement.(well its a form of micro. its actually called marmorino floor. A very hard product used for floors) Micro cement floor.


Japanese room. Shikkui wall to left using Izumi. the seating upstands are also an izumi. the floor and seating are micro cement

Piece of artwork infront of a marmorino banded wall


Left and right sides of staircase. this is Edel

and this is a polished wall with crocodilo wax. (hasnt beed buffed yet)


Rust effect wall and microcement floor. the wall is based on the Roxidan product


Microcement wet room. using Easy Floor product.


Close up of micro shower feature


Dual sinks on a micro cement top. Looks like a solid slab but its just an mdf frame
 

BobbyJack

Well-Known Member
Hi dave. Look atthe applicart site Home - Applicart

all info is on there. There are no details of a micro cement course yet but there is an office number to call. Spoke with john yesterday and the micro course will be two days due to what gets taught. One of the main points will be internal edges. As wetrooms go getting this right is keyin any job.

Alternatively you cal call me 07854803257 or John directly 07557944306
 

Nisus

Elite Member
Both myself and @SpankySouthport went to Applicart open day today in Darwen/Blackburn Lancashire and met @RobJack who is involved in the set up.
I never knew there were so many variations of this kind of work and the show room set up is fantastic. Also microcement is on offer and to see proper showroom examples of this kind of work as makes you realise how many possibilities there are for you to earn some decent money doing this kind of work!?
Courses are available to learn how to do this kind of work and for details your best asking @RobJack. Both myself and spanky are going to have a go as let's face it its another string to your bow so to speak!?
As it was an open day (tomorrow also) we had canopes on tap plus some champagne!! Served by lovely ladies who are great eye candy lads you will not be dissapointed!! If you can get to Blackburn/Darwen (junction 4 M65 at the services turn off) you will not only learn about something new and have your eyes opened how to make money in a different way!? Plus get a good eyefull off the ladies there :RpS_drool:
Get in touch with Robjack. Definatley worth it in my opinion.

PS @RobJack do I get free training for this post?? I'll make do with leftover champagne???

:-0
Thought I was coming to this? :RpS_sneaky:
:RpS_crying:
 

Marshy

Private Member
:-0
Thought I was coming to this? :RpS_sneaky:
:RpS_crying:
We went on the Saturday and you only came back from France on the Sunday mate?? We are going to do the course tho and Cassie is aswell if you want to jump on it with us ?? Robs trying to arrange a forum member discount ?? But have to wait and see? Not booked anything yet mate are you interessted? Be a good laugh all us lot there even think Beddy is keen aswell?? There's a pub not far away either :RpS_thumbsup:
 

scottie5

Private Member
We went on the Saturday and you only came back from France on the Sunday mate?? We are going to do the course tho and Cassie is aswell if you want to jump on it with us ?? Robs trying to arrange a forum member discount ?? But have to wait and see? Not booked anything yet mate are you interessted? Be a good laugh all us lot there even think Beddy is keen aswell?? There's a pub not far away either :RpS_thumbsup:
Keep me posted when the training is Greg, I might be tempted to get on this myself.
 

Marshy

Private Member
Its impressive stuff and I'm sure we all have a few customers who have the kind of money to pay for this kind of work?? For a feature wall etc it looks great plus some of the ideas and examples could open a whole new market to tap into ?? :RpS_thumbup:
 

Marshy

Private Member
Keep me posted when the training is Greg, I might be tempted to get on this myself.
Just been on phone to @cassie and hope to get @Nisus on it aswell at the same time as us ?? Ben is defo in too so should be a good laugh in the pub afterward lol :RpS_laugh:
 
Last edited by a moderator:

Nisus

Elite Member
We went on the Saturday and you only came back from France on the Sunday mate?? We are going to do the course tho and Cassie is aswell if you want to jump on it with us ?? Robs trying to arrange a forum member discount ?? But have to wait and see? Not booked anything yet mate are you interessted? Be a good laugh all us lot there even think Beddy is keen aswell?? There's a pub not far away either

I know mate, was only kidding :RpS_wink:

I wasn't that bothered about the Venetian to be honest, it was mainly to sleep on your settee afterwards that swung the deal for me :RpS_thumbsup:
Let me know dates when you get some then marra, see what I can do :RpS_thumbup:


Just been on phone to @cassie and hope to get @Nisus on it aswell at the same time as us ?? Ben is defo in too so should be a good laugh in the pub afterward lol :RpS_laugh:

Sounds good :RpS_thumbup: will your lab Danny be there? :RpS_wub:
 
Status
Not open for further replies.
Top