Ritmo spraying parex

[User___removed]

Just out of interest what water setting do the ritmo guys have for spraying monorex?
Cheers

 

[Andy M]

You must be reading my mind tonight Bobby. Have a look in the machine section.

 

[Jrend]

About 250 pal or when the pressure is a steady 15 bar.

 

[User___removed]

About 250 pal or when the pressure is a steady 15 bar.

How the hell can I be spraying at 170 with 10 bar then??
The gear is perfect with a lovely fart also!!!

 

[Curry]

What speed u spraying at? 250 @ 10 for us

 

[Bsr]

I can't seem to spray a textured/tyrolean finish with parex without getting a big join line along the scaffold. I know if you spray over sections after it gets a skin on then its a different shade straight away. I'm guessing by the time I do the elevation and drop down the skin has already formed so when spraying the next elevation I get a dirty mark along the scaffold. Any tips???

 

[User___removed]

On speed 9

 

[Curry]

I can't seem to spray a textured/tyrolean finish with parex without getting a big join line along the scaffold. I know if you spray over sections after it gets a skin on then its a different shade straight away. I'm guessing by the time I do the elevation and drop down the skin has already formed so when spraying the next elevation I get a dirty mark along the scaffold. Any tips???

3 ritmos one for the bottom, one for the middle and one for the top??? exspensive!

 

[Bsr]

??

 

[Rigsby]

3 ritmos one for the bottom, one for the middle and one for the top??? exspensive!

Plus a sparky to sort the fuse box out.

 

[PFTwales]

The ritmo L motor spins slower than an M which is why water settings vary. If u can spray at 10 bar for 15mts hose ur doing well