Refina s*p*r*lex 2

[aidangallacher1993@gmail.]

Used my Refina s*p*r*lex 2 for finishing with wet trowel. Notice faint lines as I trowel but thought nothing of it as when wall finished it looks great! It's not till next day I see faint lines but no real texture difference and won't be seen through paint. Any ideas what I'm doing wrong as I just don't seem to get on with it.
Picture of wall finished.
Picture of wall following day (lines).

 

[Stewie03]

Going over it to early with to much water the wall is barely drying in your pic

 

[aidangallacher1993@gmail.]

Going over it to early with to much water the wall is barely drying in your pic

Nice one, I'll give Flexi a go this afternoon and leave it till drys up a bit more, hopefully get a better finish this time... cheers

 

[John j]

Looks like a chip in it. Of corners bent

 

[Sitemonkey]

Used my Refina s*p*r*lex 2 for finishing with wet trowel. Notice faint lines as I trowel but thought nothing of it as when wall finished it looks great! It's not till next day I see faint lines but no real texture difference and won't be seen through paint. Any ideas what I'm doing wrong as I just don't seem to get on with it.
Picture of wall finished.
Picture of wall following day (lines).

Looks like it's got a nick in it to me

 

[johnzo]

X and o anybody

 

[Stewie03]

Nice one, I'll give Flexi a go this afternoon and leave it till drys up a bit more, hopefully get a better finish this time... cheers

Double check the edges of your trowel aswell like lads said could have a nick or chip in it if not you may have had a bit of grit or summat on your trowel when you went over the wall

 

[ChrispyUK]

might want to get some practice in on your main trowel before using the SF

 

[aidangallacher1993@gmail.]

might want to get some practice in on your main trowel before using the SF
[/QUOT

might want to get some practice in on your main trowel before using the SF

Tbf, the wall was good, it was the Flexi that done that... didn't notice till I took a step back, only see it with certain light angle and when paint on be fine but I defo want to better it

 

[aidangallacher1993@gmail.]

might want to get some practice in on your main trowel before using the SF

Got to start somewhere to make improvements, tbh I'm happy so far but yip try for better each time