What’s the best way to set dab off quick lads, need for a door way getting dabbed and skimmed up
Should do the trick
Good pointheard it’s a bit of a flash setUse make good
Yep, all of sudden set... then spend hour cleaning the s**t off tools...Use make good
Any good if your not the quickest at boarding? Only for a doorway like a set of reveals to get on it quickerYep, all of sudden set... then spend hour cleaning the s**t off tools...
Can you plumb crap walks up with it like with dab?Agree with @ChrispyUK foam is the quickest way I use instastik for stuff like this
I would say no on that one mate I've only used foam when putting board on top of existing plaster like inside walk in closets and cupboards etc I've heard of spreads putting bonding in the mix to make it go quickerCan you plumb crap walks up with it like with dab?
Got a ceiling to over board and a door way to knock off and dab Saturday so I was just thinking of getting the door way set up while I have the ceiling onCement makes wall adhesive go off quicker
What CrispyUK said foam. Insta stik Goes off in 10 mins
Why the rush?
CheersStiff dab mix an just skim it straight away
If your 30 40 minute away from the job site start the mix then.What’s the best way to set dab off quick lads, need for a door way getting dabbed and skimmed up
Ye, I done that with bag of skimming, knocked it up after work to then go do job, boarded ceiling..got to the house and the silly cow was in, but had her headphones on...If your 30 40 minute away from the job site start the mix then.