pulling inn???

Status
Not open for further replies.

Smurth1984

Active Member
Hi all me n me work partner put 2lids on smallish and 5 walls in the same flat all on in one hit.
after laying it in it would not pull in to get a 2nd hit on in time to finish before dark been using board finish on board work.
Any ideas how to get it pull in quicker. or is it a poo time off year to put loads on
 

Smurth1984

Active Member
Alrite mate how ya doing??
It was just a shi under 3 bags mate its price work round about £2.50m2
Hard to get two big hits in before its dark
 

henry

Private Member
It could just be the weather mate I did a wall last saturday and it was a 3.5 hour set .
 

NPS

Private Member
only 3 bags to do all that is it a wendy house :RpS_lol: are you doing the whole house or just the bit you have put on already? im only asking cos i am being nosey to how much you charged for 2 lids and 5 walls, im taking it you went home after youd done it
 

bobsterdobbin

New Member
Hi all me n me work partner put 2lids on smallish and 5 walls in the same flat all on in one hit.
after laying it in it would not pull in to get a 2nd hit on in time to finish before dark been using board finish on board work.
Any ideas how to get it pull in quicker. or is it a poo time off year to put loads on
evening brother ,, ya mite be as well 1 of starts to towel up while t,other 1 of ya starts puttin next 1 on an probly by time he,s flattend off he should be able to give you a lift then just drop back for cross trowel on 1st gauge ,,just an idea Smurth:)
 

Smurth1984

Active Member
ye its site mate only work thats going at the mo i wud start at 6am but carnt put the genni on till 7 as the site has people living in the opp side. its a flat with loads off pokiey little bit so carnt slam loads off metres on we usually put 130+ on in summer.
People or quick to comment on here but you try and find work at decent money round here just gotta try and do your best for your family
 

bodplasterer

Active Member
I know mate my prices are worst than that at the moment its not a good state of affairs but im still getting 2-3 sets on a day ask the site agents to get some heaters sorted as i would expect they want the job to dry there self for painting.
 

Smurth1984

Active Member
where did bodplasterer get 30/40m2 from did i say that there was 2lids a about 40m2 and the 5walls with about 40/50m2 inn
 

Curry

Private Member
Sounds sweet to me if its taking longer to go off just put a load more on

is it extra cold up north? no heating ??
 

Smurth1984

Active Member
its skiming mate on to flat board work beads and skrim dubbed and blocked day b e 4 that was just the first coat.
Thought this forum was to help plasterers help plasterers not slag each other off and mugg em off
 

Gibbo

Well-Known Member
its skiming mate on to flat board work beads and skrim dubbed and blocked day b e 4 that was just the first coat.
Thought this forum was to help plasterers help plasterers not slag each other off and mugg em off
why are you putting gear on them the day before mate im not slagging just curious
 

NPS

Private Member
ye its site mate only work thats going at the mo i wud start at 6am but carnt put the genni on till 7 as the site has people living in the opp side. its a flat with loads off pokiey little bit so carnt slam loads off metres on we usually put 130+ on in summer.
People or quick to comment on here but you try and find work at decent money round here just gotta try and do your best for your family

its only a bit of the crack mate:RpS_thumbup:

ask the across the way if you can plug ya trannie into their leccy
 

Smurth1984

Active Member
yeah right laugh mate lol lol lol
Yeah be nice alrite love can i plug ma lead in and run halogen lights all day will give you a tenner a week lol
 

NPS

Private Member
yeah right laugh mate lol lol lol
Yeah be nice alrite love can i plug ma lead in and run halogen lights all day will give you a tenner a week lol
no ya plonk lol only till 7 when you can kick the genni up:rolleyes)
 

Smurth1984

Active Member
i aint got light mate you seen the price off petrol:huh:
Yeah would be nice if i cud plug in to that bird opposite and i dont mean with ma lead lol
 
Status
Not open for further replies.
Top