PFT G4X smart for sale

Ld77

New Member
PFT G4X smart sale complete with 15 meter power cable, (3 phase) 25 meter mortar hose + airline, spray gun, stator/rotor ,toolkit and clean down hose.

Machine was purchased new 3.5 years ago and is in good working order. Power cables and hoses are in storage, will post more photos soon.

£4,500 + VAT
Aberdeen, Scotland





02FC430F-DC51-46B5-96FC-770972504A2D.jpeg
 

Attachments

  • 2B336194-07C7-4331-9D93-CA243F7745CF.jpeg
    2B336194-07C7-4331-9D93-CA243F7745CF.jpeg
    2.4 MB · Views: 165
  • AFB62FF5-1AA9-4E8F-BD08-1B26FCFC4738.jpeg
    AFB62FF5-1AA9-4E8F-BD08-1B26FCFC4738.jpeg
    2.4 MB · Views: 166
  • B69758F0-F0D7-4DF4-A77F-962B6610B0BA.jpeg
    B69758F0-F0D7-4DF4-A77F-962B6610B0BA.jpeg
    2.4 MB · Views: 165

themucky1

Well-Known Member
Won’t lie I’m tempted here , is it much faster than the ritmo m ?
The M on full tilt is about 14lpm the G4 with a d6-3 (standard r&s) on is 20lm. The only way to slow the G4 down Or speed it up is to change the rotar n stator which takes around ten mins. The D pumps usually last a lot longer than the B pumps too. If your doing bigger mono jobs more often and need it on ASAP then I’d consider it but if it’s only a few a year I’d keep the M or maybe upgrade to the ritmo L turbo. I got a turbo earlier on in the year and seriously considered selling my monojet but it don’t owe me a penny so can sit in the unit until I need it on bigger jobs. I do really rate the turbo they can fire it on 20lpm the same as the G4 without having to lump a three phase genny around
 

McPlaster

Private Member
Vincey , you might be better off with the little pee shooter ritmo M for domestic jobs. In winter and spraying later in the day for a next day scrape, 3 phase 3phase 3 phase. I use both so I know the craic.
 

Vincey

Private Member
Vincey , you might be better off with the little pee shooter ritmo M for domestic jobs. In winter and spraying later in the day for a next day scrape, 3 phase 3phase 3 phase. I use both so I know the craic.
Agreed it’s not my time yet mate, one day I’m gonna get one until then I’ll stick with the m it’s a great machine
 

Hadley

Member
The M on full tilt is about 14lpm the G4 with a d6-3 (standard r&s) on is 20lm. The only way to slow the G4 down Or speed it up is to change the rotar n stator which takes around ten mins. The D pumps usually last a lot longer than the B pumps too. If your doing bigger mono jobs more often and need it on ASAP then I’d consider it but if it’s only a few a year I’d keep the M or maybe upgrade to the ritmo L turbo. I got a turbo earlier on in the year and seriously considered selling my monojet but it don’t owe me a penny so can sit in the unit until I need it on bigger jobs. I do really rate the turbo they can fire it on 20lpm the same as the G4 without having to lump a three phase genny around
How much for the mono jet
 

themucky1

Well-Known Member
Quite possibly gonna be selling my monojet soon, machine had a service in August and not used since, plus 20kva genny water pump, compressor, water barrel hoses ect and an extension hopper
 
Top