Parex problem?

Status
Not open for further replies.

Rigsby

TPF Special Forces
I have got a mate who has been asked to render a house built out of poly blocks filled with concrete. The materials supplied are Parex and he thinks it is a mono finish. He is getting back to me with the name of parex material.

The problem is when they filled the blocks with concrete some of them moved and lifted. The worst area is 50mm out of true. He wants to know what Parex material he can use to fill out the hollows to bring the wall to flat before he starts with whatever the system is? He is not talking of a few mm to fill either.
 
From what you say It will be maite to go on the poly blocks no doubt maite and mesh the EHI mineral top coat. Or maybe acrylic top coat. If in sure call your Parex area manager to discuss they will give you the back up...


I'm using The Plasterers Forum Mobile App
 
Status
Not open for further replies.
Top