Oldroyd membrane advice


New Member
Oldroyd is on but dot and dabbing isn't an option as the board is protruding past wall finish above even without adhesive, don't fancy hacking off above to dot and dab to ceiling, can always use sand, cement, but I was wondering if it's ok to use bonding coat etc, would appreciate advice please


Well-Known Member
If your going to plaster it you need to make sure you have the mesh version
Yes bonding coat is fine...

Using sand cement not ideal as it tends to slump easily due to the plastic membrane not being porous and If it's gritty sand difficult to make it pass the mesh too ...