ok...so here it is @bg

[zombie]

seems only fair!!!....

would just like to say after being the first to criticise in the past that imo multi has been absolutely awesome to use this past 3+ months...

1 thing I have noticed is that gone are the days though when you can put it on thick im finding 2 very very tight coats literally scratched on seem to be the 1 way to go these days...

BUT mega at the mo...sooo big thumbs up from zombie!!!

 

[hstoke]

Yer right ,it's the b*ll***s right now ..

 

[raggles]

All plaster is b*ll***s

 

[kgreigh]

I'm with you on the tight coats, I started putting on thick when I got a speedskim then when I stopped using it (still use the odd time) I was in a routine of putting the gear on too heavy which made it harder to use with just a trowel, I thinned it down a bit and it's much better. Bg recomend 2/3mm and its fine to use at this depth with a trowel,2mm on decent boardwork is enough. Any casings that need building out I do with gear left over from the previous set then it's had enough time to pull in so you can just go over the top with a couple mm.

 

[ggb plasterers]

I always give 2 tight coats letting the 1st pick up never any problems

 

[Marshy]

Me and my mate are often called "2 tight coats" ....
... well it sounded like "coats" ??

 

[kebab king]

I never have a issue with the Plaster, its just the fukin chancers that doo.