S a plastering
Private Member
What's best with the corners seem to be digging in a bit tried it yesterday just for flattening
Cheers
Cheers
cheers thought that I'll do that tomozI rounded mine off
No pal just the blue plastic oneAre you talking about the metal edged one buddy?
Cheers buddyI have the blue ones an bent the corners up by hand when they were at room temperature and it worked a treat.
I rounded mine off at the edges to the radius of a 5p then also bent the corners up a bit by hand also. Bang on straight away pretty muchI have the blue ones an bent the corners up by hand when they were at room temperature and it worked a treat.
I daren't round the edges off as I always go to far and end up ruining things lolI rounded mine off at the edges to the radius of a 5p then also bent the corners up a bit by hand also. Bang on straight away pretty much
I rounded mine off at the edges to the radius of a 5p then also bent the corners up a bit by hand also. Bang on straight away pretty much
I daren't round the edges off as I always go to far and end up ruining things lol
Haha I used a 5p as well
Lol snips is better than stanleyIt might have been u i stole the idea off then, i read on here someone had done it that way and copied. Much better than my last effort
Lol snips is better than stanley
I used an angle grinder
You must have got the left handed oneNo pal just the blue plastic one
Oh yeah fuak me dint realise should of knownYou must have got the left handed one
It's ok I did it too with my first hawk and trowel. Felt like an idiot had to chuck them in the skip!Oh yeah fuak me dint realise should of known