Never using filler again

#1
Patched all ceiling with bonding and skiim cant see f**k all . Used bonding round sockets . And just couldnt be assed to mix a handful of skim. ( this is on my own gaff) so used some light weight filler. To be fair it prob still a bit soft but gonna sort it with a bit of finish . Never using f**k**g filler again
 

Attachments

ChrispyUK

Well-Known Member
#3
Patched all ceiling with bonding and skiim cant see f**k all . Used bonding round sockets . And just couldnt be assed to mix a handful of skim. ( this is on my own gaff) so used some light weight filler. To be fair it prob still a bit soft but gonna sort it with a bit of finish . Never using f**k**g filler again
Light weight stuff is shite. Easifil, bit of 2x1 and 120 grit and flatter than a witches tit!
 

markla

Active Member
#7
tou-pret tx10 much better than that nasty cheap easy-fill
 

algeeman

It’s A Boy
#8
filler is only for anything that can light sanded
 
#9
Still a touch soft think its cause it was put on bonding.