Morning all just introducing myself

Stevieo

Well-Known Member
#5
Morning all just introducing my self. just bought a Eze 24 and Looking for any tips thanks
Good morning and welcome to the forum.

My tip for you is that if you upset GPS he will follow you around for days, waving his boney little fists in the air.
 

Vincey

Private Member
#13
Welcome what kind of jobs will you use it for ?
 

Rossi46

Private Member
#17
Welcome! If you ask @Rossi46 , you should have gone for ritmo
Agree, strongly agree, cannot agree more.
Eze is good for spraying bucket coats.
Try base coats and it’s a ball ache. It didn’t like polymer base coats. The r&s used to whine it’s head off! OCR’s to get a half decent spray you need to keep the hopper really full to keep the gravity feed up. When it starts getting low it’ll spray so slow you could spray better with a bicycle pump.
I got lucky and got my money back on it.
It was a good Introduction to machines I suppose.
 

essexandy

Private Member
#20
Agree, strongly agree, cannot agree more.
Eze is good for spraying bucket coats.
Try base coats and it’s a ball ache. It didn’t like polymer base coats. The r&s used to whine it’s head off! OCR’s to get a half decent spray you need to keep the hopper really full to keep the gravity feed up. When it starts getting low it’ll spray so slow you could spray better with a bicycle pump.
I got lucky and got my money back on it.
It was a good Introduction to machines I suppose.
Well if you're going to just 'sit on the fence' I don't know why you bothered to reply?