love it

Members online

Status
Not open for further replies.

spunky

Private Member
used the machine for the first time today there mint we did 85m in 2 1/2 hours! Has anyone got any tips for spraying especially around beads it just wants to slide around on them
 

raggles

Private Member
Sure i have read in post's that they fill out around the bead before they start spraying for this reason but i'm sure someone will be able to inform you better than me :RpS_lol:
 

spunky

Private Member
Will do let me know if you want to give be anything free too lol, were spraying j20 parex runs, its not my machine its the bosses an mtec m300, does anyone know if its quicker spraying with a 35mm hose than 25?
 

casey200

New Member
cool . i solid dab all my beads since a drip bead got knocked off by a scaffolder! and get me lab to bed the mesh in round windows .then spraying is a breeeeeeze. not that its hard anyway.
 

keithuk

Private Member
used the machine for the first time today there mint we did 85m in 2 1/2 hours! Has anyone got any tips for spraying especially around beads it just wants to slide around on them
It is a good feeling Dave ,when it all goes right ,well done mate tomorrow 130m :RpS_thumbsup:
 

lilharbs

New Member
Oh look who is spraying their muck now then!!the biggest critic of machines spunkster.my machine can do this,my machine can do that.ooohh currier,can I be your best friend??:RpS_wub:
 

spunky

Private Member
Cheers Keith we had a wall that had 12 m in it and it must of took no more than 5-10 mins to spray it its mental, **** me are you doing 130m tomorrow?
 

keithuk

Private Member
Cheers Keith we had a wall that had 12 m in it and it must of took no more than 5-10 mins to spray it its mental, **** me are you doing 130m tomorrow?
No mate :RpS_lol: it does give a buss ,when you look at what you done in the time ,and as i have always said ,without the strain
 

lilharbs

New Member
Just pullin it mate,would like to have a go myself,got to embrace the future or get left behind.thats evolution.:RpS_thumbsup:
 

spunky

Private Member
Oh look who is spraying their muck now then!!the biggest critic of machines spunkster.my machine can do this,my machine can do that.ooohh currier,can I be your best friend??:RpS_wub:

its probably a little bit more complicated than that
 

spunky

Private Member
Cheers mcplaster im only subbying though if it did ever pick up i might have a look who knows, jim it was second hand
 

spunky

Private Member
The dark sides alot ******* faster than the light side lol......were spraying again tomorrow I bet it goes tits up!
 

spunky

Private Member
Did ok today we moved the airline back so it was farting before we were getting loads of so bubbles so hopefully that will help I managed to turn the switch off so the rotor stopped for a bit and it pissed down apart from that bring it on
Be nice to get on a normal job yesterday was tonnes of taping and today was off towers
 

goody

Private Member
Yo spunk...wait til you spray weber OCR onto blocks and be walking away at 4 with a floated wall that's minter than by hand! Pitty the guy sitting next to you on the way home when your getting rather keen about your machine lol
 

keithuk

Private Member
Did ok today we moved the airline back so it was farting before we were getting loads of so bubbles so hopefully that will help I managed to turn the switch off so the rotor stopped for a bit and it pissed down apart from that bring it on
Be nice to get on a normal job yesterday was tonnes of taping and today was off towers
We have started to use tape from Ryan that leaves no marks ,so now we can tape up and leave it on ,not like duck tape which is a nightmare ,food for thought when your beading out ,tape up the same time ,glad it is going well ,but been s**t weather
 

goody

Private Member
I always like to see the frame when beading....and it's usually wet from a bit of a brush at beading time so what's your method for masking same time butt?
 
Status
Not open for further replies.
Top