Runswithscissors
Private Member
Hello fellow asylum playmates.....
I am working on a project with a very demanding client!!!!
They have a new building in construction, which will have Knauf Aquapanel Exterior applied and then a full Knauf Marmorit thin coat system (SM700, mesh and then Conni s)..... the Conni s will be white with a 2mm grit....
The problem is, it is in a fairly exposed area open to sometimes fairly high winds...... these winds pick up a lot of dust and grit due to the location.
The work is planned to be done off cherrypickers (due to access and building position).... how do you stop the dust and crap getting into the bright white top coat while it drys?
Best answer may win a prize from the client! (don't ask me what.....)
I am working on a project with a very demanding client!!!!
They have a new building in construction, which will have Knauf Aquapanel Exterior applied and then a full Knauf Marmorit thin coat system (SM700, mesh and then Conni s)..... the Conni s will be white with a 2mm grit....
The problem is, it is in a fairly exposed area open to sometimes fairly high winds...... these winds pick up a lot of dust and grit due to the location.
The work is planned to be done off cherrypickers (due to access and building position).... how do you stop the dust and crap getting into the bright white top coat while it drys?
Best answer may win a prize from the client! (don't ask me what.....)
Last edited: