I section

[Bagrat]

Can anyone please advise me please? Got a front bay round to do in mono scratch.I've got a isection 1.2m but the bay is maybe 2m any ideas what to use as I don't think you can get a isection bigger than 1.2 m . I've got some primary channel but am not sure if would be good To open up? Many thanks

 

[henry]

can you not cut down to a smaller size,

 

[spunky]

You nutter what would you use if the the wall was 8m high lol

 

[henry]

read the post wrong LOL

 

[spunky]

s**t thought I had for a min lol

 

[lucius]

Here we go again, FFS you are having a laugh just Isection with what you have.
Ime worried now is itme

 

[Bagrat]

Do 10 mil plastic bend enough round bay without kinking?

 

[mark ross]

Going round is all in the eye, as long as you rule it round well ( keep using your eye) ,then scratch back evenly and carefully ( keeping a close eye) should come good. Personally I would not use I section on curve,just a scratcher and a keen eye.After all thats how the architect or customer will see it

 

[DominoRemoved]

refina sell longer one mate if that helps im thinking of get one of them new straight adges with the rolled handel