Hi everyone

CeeVee

Well-Known Member
#8
What sort of work mate
Ok so I changed the bar that attaches to the rotor/stator and the machine worked great, did a full house.
Then I went to do an extension and the guy had bought parex...I thought I'd got the mixed sussed so banged it through the eze mix but it ended up being far too thick.
The Eze24 then stopped pumping but something was still churning round.

Cleaned it out and it works with water.
Sooooo. .its my assumption that the bolt I tightened wasnt quite tight enough for a really thick mix...and its loosened.

Soooo...I lost 16m of hose.

Sooo...it needs
1. Looking at by someone competent to tighten up the necessary motor bolts
2. New material hoses (for mono...Its got the full skim set up)
3. Possibly a new r/s

Thats it boss.
 
#9
Hi cheers no problem I’m just waiting to hear about my car getting fixed not sure on cost for that so if u seal it no problem but I’m looking around end of next week to hear what car will cost me if it’s not gone I’ll have it
 

Danny

Administrator
#11
Hi cheers no problem I’m just waiting to hear about my car getting fixed not sure on cost for that so if u seal it no problem but I’m looking around end of next week to hear what car will cost me if it’s not gone I’ll have it
Welcome along :D