Finishing off k-rend job in Worcester

Hi, I'm looking for someone to complete a k rend tc 10mm job. The sub base coat has only recently been "completed" with hp12 and mesh but it's a poor finish and so I'd like to find someone to make it good and look professional.

I have the primer and 3 tubs of 1mm top coat in my shed but i guess it'll require a few more bags of hp12. The single storey extension wall area is about 26m2 in total but perhaps the boundary won't require any more attention as it seems the least bad so that possibly leaves about 15m2 to fix.

I'm in Worcester, a few mins from the M5. My email is --togetzane@hotmail.com
Thanks for looking
 

Attachments

  • 20200607_070428.jpg
    20200607_070428.jpg
    3.2 MB · Views: 105
  • 20200607_070318.jpg
    20200607_070318.jpg
    2 MB · Views: 96
  • 20200607_070333.jpg
    20200607_070333.jpg
    4.1 MB · Views: 93
  • 20200607_070225.jpg
    20200607_070225.jpg
    3 MB · Views: 98
  • 20200607_070437.jpg
    20200607_070437.jpg
    4.6 MB · Views: 93
  • 20200530_061029.jpg
    20200530_061029.jpg
    1.8 MB · Views: 81
  • 20200530_065901.jpg
    20200530_065901.jpg
    2.1 MB · Views: 108
  • 20200530_061113.jpg
    20200530_061113.jpg
    2 MB · Views: 74

McPlaster

Private Member
Hi, I'm looking for someone to complete a k rend tc 10mm job. The sub base coat has only recently been "completed" with hp12 and mesh but it's a poor finish and so I'd like to find someone to make it good and look professional.

I have the primer and 3 tubs of 1mm top coat in my shed but i guess it'll require a few more bags of hp12. The single storey extension wall area is about 26m2 in total but perhaps the boundary won't require any more attention as it seems the least bad so that possibly leaves about 15m2 to fix.

I'm in Worcester, a few mins from the M5. My email is --togetzane@hotmail.com
Thanks for looking
A complete f**k up. Can someone help put it right really cheap?
 

Tom81

Well-Known Member
He’s cuunt, Steve Gatfield is one bloke I could knock fuuck out off all day without getting bored of doin it
Tell me why you not like my friend?
I don't know him personally but know he's got a strong reputation in Herefordshire and Worcestershire
 

themucky1

Well-Known Member
Tell me why you not like my friend?
I don't know him personally but know he's got a strong reputation in Herefordshire and Worcestershire
He was in the s**t on a job years back big school in Nuneaton, me n my gang went in finished the insulation work off and sorted the other shite out him n his lads done, meshed the two biggest panels on the job and textured the lot in 3 different colours like a fuckin chess board we pulled our tripe out on there to help him out then tried comin the cuunt when it was payday saying he was gonna hold money back until the mc had signed it off, the would answer the phone but would send texts and said he was withholding money due to cleaning ect so I went back to site and the cleaning was the news him n his morons had made. I got on with the site agent he called him up and said either pay the lads what you owe em or we’ll pay them what we owe you. It went in the next day
 

themucky1

Well-Known Member
He had one on him when he asked if we’d do another job for him and I told him to get fuucked he could t understand why lol big prick man
 

Tom81

Well-Known Member
He had one on him when he asked if we’d do another job for him and I told him to get fuucked he could t understand why lol big prick man
I would feel the same he's a dick then,
He's highly rated around Worcestershire multi million pound projects the norm for him
 

Tom81

Well-Known Member
He had one on him when he asked if we’d do another job for him and I told him to get fuucked he could t understand why lol big prick man
I feel bad recommending the twat now are kid
I will make the lab vandalize his vans if I come across them
 

themucky1

Well-Known Member
I feel bad recommending the twat now are kid
I will make the lab vandalize his vans if I come across them
Dow worry about it aahk lol he’s a cock he’s been bumped once and will no doubt get bumped again cus he’s greedy without being clever about it, that type always get bitten a few times
 

Monkey Boy

Well-Known Member
Lots of poor work all round. Push fit waste. Badly laid out Or rather not thought out fascia and cladding trims
 
Lots of poor work all round. Push fit waste. Badly laid out Or rather not thought out fascia and cladding trims
Yep, it's unfortunate. The builder in question didn't follow the original plan and did a poor job on the fascia etc. As for the compression fittings....that was put there to allow the plasterers to remove and make a smooth job of it. Guess that hasn't happened....

Unfortunately its been a difficult affair all round. I've been in poor health (lyme disease, infections and subsequent effects) for some years and struggled with trying to do many of the works myself. I've been concentrating on the interior to be honest. But I've struggled to find honest and reliable tradesmen. I have a 20 month year old son as well....who has given me a renewed sense of purpose yet is demanding naturally.

I just completed a job for building control who gave me a deadline for finishing a number of works. I'd organised a carpenter but that was just b4 lockdown and he has yet to return to work. So I've had to have a go.


It's been a hell of a ride so far and bo doubt there's more challenges in store.

Ps I fitted the doors and had to rush fitting the landing balustrade for building control and their final visit this week and as such the floor (gas pipe needs changing so waiting for plumber) and doorways are incomplete...along with other aspects of course
 

Attachments

  • 20200617_132432.jpg
    20200617_132432.jpg
    1.5 MB · Views: 38
  • 20200617_132340.jpg
    20200617_132340.jpg
    1.5 MB · Views: 40

loky11

Active Member
Yep, it's unfortunate. The builder in question didn't follow the original plan and did a poor job on the fascia etc. As for the compression fittings....that was put there to allow the plasterers to remove and make a smooth job of it. Guess that hasn't happened....

Unfortunately its been a difficult affair all round. I've been in poor health (lyme disease, infections and subsequent effects) for some years and struggled with trying to do many of the works myself. I've been concentrating on the interior to be honest. But I've struggled to find honest and reliable tradesmen. I have a 20 month year old son as well....who has given me a renewed sense of purpose yet is demanding naturally.

I just completed a job for building control who gave me a deadline for finishing a number of works. I'd organised a carpenter but that was just b4 lockdown and he has yet to return to work. So I've had to have a go.


It's been a hell of a ride so far and bo doubt there's more challenges in store.

Ps I fitted the doors and had to rush fitting the landing balustrade for building control and their final visit this week and as such the floor (gas pipe needs changing so waiting for plumber) and doorways are incomplete...along with other aspects of course

20 month year old son?
 
Top