Dodgy stud work

bof

Well-Known Member
And for my next mad post....
When possible to straighten out dodgy stud and ceiling joists I score the wood and apply board adhesive and level off with a straight edge , anyone else , lurpack perhaps ?
 

bof

Well-Known Member
Use 15mm boards then just miss that joist out lol! :guitarra:
Only been on a site a few times ( 20 y ago ) and from what I experienced , that's probably acceptable, I've seen the quality , do you know how much / m 2 for skimming houses ( London rates ) . I can slap plenty on to that standard
 

jamesthefirst

Private Member
Only been on a site a few times ( 20 y ago ) and from what I experienced , that's probably acceptable, I've seen the quality , do you know how much / m 2 for skimming houses ( London rates ) . I can slap plenty on to that standard
No I’ve never been to London but I hear one can make ones fortune @£6.76 per square metre.
 

ChrispyUK

Well-Known Member
In all fairness, Schluter who make tiling board and all that s**t, call it wet shimming. You use tile Addy to level out the stud work, board, let it go off then screw it tight.
 

bof

Well-Known Member
In all fairness, Schluter who make tiling board and all that s**t, call it wet shimming. You use tile Addy to level out the stud work, board, let it go off then screw it tight.
Not sure if that would hang off cieling joists as thick as board adhesive ,
 
Top