Bonding coat

MFL Plastering

New Member
Hi guys customer has had a wall skimmed by other plasterers 3 times now and it's blown its on bonding coat in an attic so it's hot up there Pva is not good enough no matter how many coats you do. Was recommended gypprime or bostik cement one plasterer stabaliser
 
ray donovan omg GIF by Sky

Plumbers forum.
 
People think there so funny on here just after a bit of advise if I could just rock up and Pva it n skim I would but it won't work its been done 3 times already
 
The bonding that's on is in a attic and has been on for 6 years so is very dry and whenever anybody has just Pva and skimmed it always blown
 
Sell them a heat recovery unit to pump the hot air back downstairs


Then do the plastering
 
That's cos ure a spaka pretending to be a plasterer :coffe:
The bonding that's on is in a attic and has been on for 6 years so is very dry and whenever anybody has just Pva and skimmed it always blown
Bit of advise don't put MFL PLASTERING on your avatar if you keep failing! Maybe what you call a deer with no eyes that plasters?
No idea Plastering!
With no legs?
Still no idea Plastering. Com:numberone:
 
Top