BG state multi finish IS suitable to spray

[CeeVee]

Says so here about two thirds down in the key facts that it is suitable to apply with a machine.

http://www.british-gypsum.com/products/thistle-multi-finish

 

[MikeAtthis]

i spray it

 

[CeeVee]

I just know it's never been recommended mate.
You ever had any problems with it?

 

[theclemo]

I had problems with it. If you put the gun down for a minute there is a good good chance it will clog.

 

[MikeAtthis]

It bubbles a bit but a sponge sorts it out
I've got a ritmo there's me and a lad we done 110m2 1 hit in to OCR never had a problem with it blocking


Sent from my iPhone using Tapatalk

 

[Plasterers1StopShop]

Says so here about two thirds down in the key facts that it is suitable to apply with a machine.

http://www.british-gypsum.com/products/thistle-multi-finish

Have said this for a long time. The m-tec m100 was developed to mix and spray multi finish. We have teams using this and board finish regularly with no issues.

Here is a screenshot from our Facebbok page of what a recent customer using the M100 has said

 

[MikeAtthis]

Dura finish sprays OK as well
Well it did 4 or 5 years ago


Sent from my iPhone using Tapatalk

 

[User___removed]

100m2 in 20 minutes!!!

 

[MikeAtthis]

Just think what the 200 will do


Sent from my iPhone using Tapatalk

 

[zolco]

Just think what the 200 will do


Sent from my iPhone using Tapatalk

Break the bank?

Sent from my Nexus 6P using Tapatalk

 

[User___removed]

So 2 gauges take 3 hours each then the 3rd takes 2 hours??!!

 

[Rossi46]

Did you manage to get hold of a skim spray setup craig?

 

[zolco]

So 2 gauges take 3 hours each then the 3rd takes 2 hours??!!

I think he meant they can throw on a 100 m by hand twice a day, but with the machine they can do a third one

Sent from my Nexus 6P using Tapatalk

 

[stiltwalker]

Just think what the 200 will do


Sent from my iPhone using Tapatalk

Get your deposit down heard its going to out perform similar priced machines

 

[MikeAtthis]

We've all heard lol


Sent from my iPhone using Tapatalk

 

[zolco]

Get your deposit down heard its going to out perform similar priced machines

Hes saving up a while now I think

Sent from my Nexus 6P using Tapatalk

 

[Danny]

Says so here about two thirds down in the key facts that it is suitable to apply with a machine.

http://www.british-gypsum.com/products/thistle-multi-finish

so does that mean BG spray finish is now not needed? @BritishGypsum

 

[User___removed]

How much is it like?
How far will it pump?

 

[MikeAtthis]

so does that mean BG spray finish is now not needed? @BritishGypsum

At the price and by the pallet could be lol

 

[User___removed]

Get your deposit down heard its going to out perform similar priced machines

Depends who you talk too

 

[Plasterers1StopShop]

Yet again the PFT Brigade get on the slating bandwagon.

I don't write the reviews.... Why don't you ask the guy himself?

And yes, the M200 will out perform other machines. The M100 is like for like with the Ritmo and it performs far better than that

 

[CeeVee]

Did you manage to get hold of a skim spray setup craig?

Saving up the pennies for a new un I think mate

 

[User___removed]

Yet again the PFT Brigade get on the slating bandwagon.

I don't write the reviews.... Why don't you ask the guy himself?

And yes, the M200 will out perform other machines. The M100 is like for like with the Ritmo and it performs far better than that

I'm asking questions
So the m100 out performs the ritmo,says who?
I've heard the m200 is like for like with the ritmo m for distance and has a smaller motor?
Pumping distance 15-20m

 

[User___removed]

I think he meant they can throw on a 100 m by hand twice a day, but with the machine they can do a third one

Sent from my Nexus 6P using Tapatalk

Oh right I see.

 

[Vincey]

Says so here about two thirds down in the key facts that it is suitable to apply with a machine.

http://www.british-gypsum.com/products/thistle-multi-finish

Spray finish is a different formula to multifinish, what bit did it say it is okay to spray multifinish in that link? I read the link but couldn't find it

 

[Plasterers1StopShop]

I'm asking questions
So the m100 out performs the ritmo,says who?
I've heard the m200 is like for like with the ritmo m for distance and has a smaller motor?
Pumping distance 15-20m

I'm saying the M100 is like for like with the Ritmo. The M200 out performs them both.

I know you have heard that, an surprise surprise it came from a competitor.

As stated lots of times, the U.K. version is very very different to the EU version.

Why? Because we designed the parts to go on it, we made the adaptions, this is why we went to M-tec the other week, and they have honoured our 'adaptions or changes' by only making them for the UK market.

 

[Plasterers1StopShop]

Also @bobby if you know your machines and didn't believe everything competitors told you.. You would also know the M330 has a smaller motor that the G4 and G5 yet out pumps them both on output and distance

 

[CeeVee]

Spray finish is a different formula to multifinish, what bit did it say it is okay to spray multifinish in that link? I read the link but couldn't find it

On the key facts mate

 

[Vincey]

Spray finish is a different formula to multifinish, what bit did it say it is okay to spray multifinish in that link? I read the link but couldn't find it

No worries I found it cee vee in key facts bit.

 

[Vincey]

On the key facts mate

Where are you based?

 

[User___removed]

I'm saying the M100 is like for like with the Ritmo. The M200 out performs them both.

I know you have heard that, an surprise surprise it came from a competitor.

As stated lots of times, the U.K. version is very very different to the EU version.

Why? Because we designed the parts to go on it, we made the adaptions, this is why we went to M-tec the other week, and they have honoured our 'adaptions or changes' by only making them for the UK market.

Ok when it's out on the market get some videos up so we can see what that machine can do

 

[Rossi46]

@theplasterman
Pete did you end up hiring the eze for spraying finish?

 

[Plasterers1StopShop]

Ok when it's out on the market get some videos up so we can see what that machine can do

We will be mate, don't worry.

The guys who have also had demos on them have been very impressed. The sales are going well

 

[Vincey]

@theplasterman
Pete did you end up hiring the eze for spraying finish?

No, job was a mess builder was boarding rooms as I was going through the house so cancelled it .

 

[keithuk]

We will be mate, don't worry.

The guys who have also had demos on them have been very impressed. The sales are going well

so the machine is in the uk ?