Best place to buy good strong straight edge?

[Rbyrne98]

Looking the best place to find a good sturdy edge for s&c find most of them too flimsy

 

[ChrispyUK]

Looking the best place to find a good sturdy edge for s&c find most of them too flimsy

I’ve got a nice 6 foot straight edge that I found in a garage of a rental property we took on. Really thick Ali. Bought an 8 footer which is ok, but not same quality.

The best one I had was made for me by a welder fabricator mate. He machined an edge on an I section beam he had lying around. Strong and rigid as...straight as a die too, just couldn’t pick the f**k*r up.

 

[MakeItSmooth]

Looking the best place to find a good sturdy edge for s&c find most of them too flimsy

Have you 'ruled out' Refina?

Straight Edges, Levels & Darbies - Buy Online | REFINA

REFINA aluminium levels and rules come in a wide range of sizes and shapes from 1.2-3m long and with h section, box section or trapezoid profiles

www.refina.co.uk

 

[zombie]

Anything refina generaly a1

 

[essexandy]

Those Refina trapezoid ones are shite, too flimsy for anything over about 1.5m.
The last decent quality featheredge I bought was made by Tayler Tools.

 

[Topspread16]

I take the end caps off and fill them with expanding foam. Sturdies them up abit and they don’t sound as tinny

 

[Tinytom]

Those Refina trapezoid ones are shite, too flimsy for anything over about 1.5m.
The last decent quality featheredge I bought was made by Tayler Tools.

Iv got a Tayler 8ft it’s mega compared to the new cheap shite

 

[John j]

Got one from Sheffield insulation bout 20 years ago I think. Working on a site up Manor top I think it was @zombie . f**k**s used to pull up in vans and cut chains and nick generators

 

[Plasterers1StopShop]

ERGO H Rule from P1 is very strong.