I do indeed we call it a plunger in sunny Salforddo you mean a bath, larry, whisk and a podger?
Ha ha you've never lived till you've rasked a cool 25 browning in a tin bath have hadNo i am far too young to remember the use of any of the things you mention and anyway using an Eibenstock 1800 is hard work enough
Raked I meantHa ha you've never lived till you've rasked a cool 25 browning in a tin bath have had
Ha ha the good old plunger days best hangover cure known to man .View attachment 13177 Can't beat a plunger for a good work out.
Ha ha oooh yes so we have some proper plasterers on here not a bunch of time served skip fillersand when bags of plaster were much heavier...
You muI'm too young to remember these days but I've heard all about them. Mixed up without a whisk before and it was hard work, I can get two bags of multi up on my shoulder![]()
I'm too young to remember these days but I've heard all about them. Mixed up without a whisk before and it was hard work, I can get two bags of multi up on my shoulder[/QUOTE
We used to mix everything by hand as young kids of 16 . To do a cylinder cupboard or under the stairs was a bonus Christ I feel old nowYou mu
That's a posh one. Bike cog screwed onto a bit of batten.View attachment 13177 Can't beat a plunger for a good work out.
At last people who know what they are talking aboutAnd essian skrim
Hessian my friendAnd essian skrim
That was before we got into the modern worldThat's a posh one. Bike cog screwed onto a bit of batten.
Oh yeh to much red wine my friendHessian my friend
Ha ha a young kids told me about this forum on site I find it hilarious the goons who ask the daftest of questions. Plasiflex nela speed skim . Christ I had a tyz acknowledge twin shank 11 inch when I was a young enOh yeh to much red wine my friend
We use to look after the cog and batten a lot more than a modern whisk.it was a nightmare trying to get a cog back in the dayThat's a posh one. Bike cog screwed onto a bit of batten.
Yeh people looked after things then. Now everyone knows the cost of everything and the value of nothing. Things are much easier now though and getting anything is easy with the netWe use to look after the cog and batten a lot more than a modern whisk.it was a nightmare trying to get a cog back in the day
What the hellenby is a Larry is that what u call a bath mate were from Salford have had were you from ??Me and another lad knocked up 85 bags of browning with a rake and a larry in a bath with a ply base and scaffold board sides !
Yeh people looked after things then. Now everyone knows the cost of everything and the value of nothing. Things are much easier now though and getting anything is easy with the net
I did 30 and then podged the skim went home and told me mam I hated the c**ts I worked for ha ha .Me and another lad knocked up 85 bags of browning with a rake and a larry in a bath with a ply base and scaffold board sides !
My gaffer got me a over sized hod for renovating plaster backing you could fit a bath full of gear in it and it you missed timed putting it on the spot board it would launch you upwards by the balls good old days
It's what you hide your can of tennents under.Ha ha fukin brilliant no one knows wat a spot board is these days
Nela this plazi that for f**k sake what's wrong with a nice normal skimming trowel.Ive been using Marshall towns for years and no ones getting it flatter,it's all bullshit marketing.And before anyone jumps down my throat about this new shits better for your joints etc etc I ain't a in it,I'm 54 and still banging it on old school rocks
Nela this plazi that for f**k sake what's wrong with a nice normal skimming trowel.Ive been using Marshall towns for years and no ones getting it flatter,it's all bullshit marketing.And before anyone jumps down my throat about this new shits better for your joints etc etc I ain't a in it,I'm 54 and still banging it on old school rocks