apoxy resin

[UserRemoved]

apoxy resin crack repair in old rendering there is a load of cracks in the rendering on my mums house and the grant pople said that it needs this apoxy resin stuff now is it a plasterers/renderers job or is it a specialist fild ???
lads im stumped as how to go about this stuff and is it work of a scaffold HELP
all i can find is this http://www.screwfix.com/prods/34894/Building/Builders-Metalwork/Helifix-Crack-Stitching-Kit
looks easy i think :-X

 

[Render Systems]

the brick work cracks will need cutting out and stainless steel pins EPOXY RESINED across them. the pins are like big staples

 

[UserRemoved]

thanks m8te but is it a plasterers job or a builder ???

 

[Stone Effect]

There are many ways to stitch cracks depending on the substrate and the type of cracks (active or inactive) if they are a structural problem then heli-bars or similar are good, if they are fine and non structural then a two part epoxy can be injected with a syringe type tool very fast setting and do the job. I have used this system on listed buildings when repairing facades and archtectural repairs etc and heli-bar and similar systems on bridges, sidings etc

If you want any further info on any of the products pm me I have used quite a lot over the years