Anyone used this?

[Neilevs18]

Anyone used this stuff yet? Thinking of getting some to try as I do a lot of patching in work so would be ideal (if it actually works). Just wana hear some opinions on it before I waste my money. Thanks.

 

[dustydave]

Use dirty water. Or mix a bit of plaster slurry before leaving home. Money saved equals more beer

 

[Olican]

Hot water

 

[Cockney1]

Hot water

Hit and miss that mate.

 

[Cockney1]

View attachment 41410
Anyone used this stuff yet? Thinking of getting some to try as I do a lot of patching in work so would be ideal (if it actually works). Just wana hear some opinions on it before I waste my money. Thanks.

Dirty water is equally as good if not better. How long have you been Plastering?

 

[lurpak]

Hit and miss that mate.

fookin myth if ask me. Never worked. Same as cement in bonding.

dirty water . Dirtier the water the faster it sets

 

[Deleted member 32554]

Never understood the hot water approach once spread over a wall a few mm thick would lose its heat , just leave mix in the bucket if you want to cook ,

 

[McBentLegs]

fookin myth if ask me. Never worked. Same as cement in bonding.

dirty water . Dirtier the water the faster it sets

Cement in bonding is definitely no myth! You can get it to set in minutes with enough of it!

 

[Deleted member 32554]

Cement in bonding is definitely no myth! You can get it to set in minutes with enough of it!

Use it to fix back boxes in , Addy and cement is better

 

[lurpak]

Cement in bonding is definitely no myth! You can get it to set in minutes with enough of it!

load of b*ll***s. Tried all of it. Rapid set. Loads of it. Take f**k**g ages. Dirty water flash sets in 10 mins any depth

 

[Deleted member 32554]

load of b*ll***s. Tried all of it. Rapid set. Loads of it. Take f**k**g ages. Dirty water flash sets in 10 mins any depth

I use dirty water and old MF , cement and gypsum certainly works but wouldn't chance it in skim

 

[lurpak]

I use dirty water and old MF , cement and gypsum certainly works but wouldn't chance it in skim

dont make me do a video dirty water vs cement as I will lol

 

[McBentLegs]

I use dirty water and old MF , cement and gypsum certainly works but wouldn't chance it in skim

Cement doesn't work in skim, tried that, just makes it look f**k**g rank lol

 

[themucky1]

dont make me do a video dirty water vs cement as I will lol

Yow wow

 

[Deleted member 32554]

dont make me do a video dirty water vs cement as I will lol

Don't bother , I don't trust what " tool" you will use to mix it lol

 

[tapit]

Use it to fix back boxes in , Addy and cement is better

Get it in seconds if you use rapid set cement, gone off before you get it on the wall, tell customer dodgy gear,go down pub.

 

[tapit]

Use it to fix back boxes in , Addy and cement is better

I am old fashioned and prefer plugs and screws.

 

[superspread]

Load of fu cking cowboys

 

[essexandy]

Load of fu cking cowboys

Have you only just noticed?

 

[superspread]

Have you only just noticed?

Yea but I’m just too polite And

 

[Fatarm]

Handful of lime thru your bonding

 

[jamesthefirst]

Where can you purchase this dirty water, is it in 5 or 10 litre tubs?

 

[MIXERMAN]

I use a trowel ful of post Crete in small sand and cement jobs . Cement. And dirty water in bonding is tried and tested.

 

[John j]

Hit and miss that mate.

Pains me to agree pva boy lol

 

[John j]

I use a trowel ful of post Crete in small sand and cement jobs . Cement. And dirty water in bonding is tried and tested.

Cement in bonding works a treat

 

[John j]

Where can you purchase this dirty water, is it in 5 or 10 litre tubs?

10 if you give me till after first set

 

[algeeman]

how can you possibly say hot water doesn't work ???


it's set off the chemicals in skim so you can barely spread it.

 

[John j]

how can you possibly say hot water doesn't work ???


it's set off the chemicals in skim so you can barely spread it.

I.ve used it once by mistake . Really hot and it did nothing

 

[The Hobo]

easiest way couple of bags of good stuff leave in a garage /shed etc with top cut open then after a couple of months try a bit in a tub to see if ready once u start to use repeat process to keep cycle going . done this for a life time it works ,u can also try using allum but to much will kill the set

 

[algeeman]

I.ve used it once by mistake . Really hot and it did nothing

really hot by mistake lol
good god.


many winters water pipes on site been frozen lads have took piping hot water out of canteen and toilets to set it faster.....

over mixing will send it off quicker because its creating to much heat.

I used to be chemical engineer john

 

[John j]

really hot by mistake lol
good god.


many winters water pipes on site been frozen lads have took piping hot water out of canteen and toilets to set it faster.....

over mixing will send it off quicker because its creating to much heat.

I used to be chemical engineer john

They had hot and cold out side. Never realised till I dropped a bit on my arm . Though f**k me that's hot

 

[John j]

really hot by mistake lol
good god.


many winters water pipes on site been frozen lads have took piping hot water out of canteen and toilets to set it faster.....

over mixing will send it off quicker because its creating to much heat.

I used to be chemical engineer john

Couple of lines of sniff in night club toilet doesn't make you a chemical engineer mate

 

[algeeman]

Couple of lines of sniff in night club toilet doesn't make you a chemical engineer mate

it did at the time lol

 

[algeeman]

@Cockney1 not allowed to disagree out of work hours

its beer time now lol xx

 

[Cockney1]

@Cockney1 not allowed to disagree out of work hours

its beer time now lol xx

Sorry mate, forgot the rules of engagement for a second there. f**k**g old lady’s driving me mad! Lol. X