Advice needed

Members online

AJG22

New Member
Hi,

I am new to plastering and had a lot of damage to the kitchen wall which I filled with standard filler. I bought some PVA and Finishing plaster to do the wall but do you guy think this would be enough?

Thanks

Alan
 

Attachments

  • 20210325_083158.jpg
    20210325_083158.jpg
    2.4 MB · Views: 159
If you need to ask, then don't do the plastering yourself, you will end up needing more filler.
As spread95 said, fine coat and sand.
If you are still unsure, one coat of paint on the wall will give you the answer
 
Hi,

I am new to plastering and had a lot of damage to the kitchen wall which I filled with standard filler. I bought some PVA and Finishing plaster to do the wall but do you guy think this would be enough?

Thanks

Alan
Scrape any high spots off the filler and get it as flat as possible then give it a thicker than usual coat of skim if need be an it will be fine. Assuming you're competent
 
Top