What could bleed through from substrate?? 2 of them are just circles and te last one is a shape that looks like the shape of a rubber duck!!! Strange!!
Completed a scratch render job back in October. Got a call back to say 3 areas constantly look Wet/ stained. Had a look today there are 3 areas around the size of a football that look wet but he said constantly looks like that and never dries out. At first sight it looks like damp but not sure...
Think it may be a combination of as u say the scaff too close and the 2 main times its happened it was both a freaky red hot day. I'm thinking if that hot again to do smaller bands to beat the join??
I can't seem to spray a textured/tyrolean finish with parex without getting a big join line along the scaffold. I know if you spray over sections after it gets a skin on then its a different shade straight away. I'm guessing by the time I do the elevation and drop down the skin has already...
I can't seem to spray a textured/tyrolean finish with parex without getting a big join line along the scaffold. I know if you spray over sections after it gets a skin on then its a different shade straight away. I'm guessing by the time I do the elevation and drop down the skin has already...
I can't seem to spray a textured/tyrolean finish with parex without getting a big join line along the scaffold. I know if you spray over sections after it gets a skin on then its a different shade straight away. I'm guessing by the time I do the elevation and drop down the skin has already...
When spraying textured monorex how can I avoid the horizontal scaffold marks? Job looks mint until scaff moves and can see shadows where its been. Next tip is for masking up...taking forever cleaning using normal plastic and masking tape. Just started to use the blue stuff and orange tape. On...
Need to remove tile from the front of a house...behind is timber frame so will need something to render onto??? I am told strong ply and metal laths but also render boards. I am applying monocouche render with textured finish. Which method is best? Is the render board strong enough for textured...
Hi, anyone advise what is best to use for speed and effectiveness for masking windows? Also, what is best to cover down pipes etc? Been using plastic sheeting but when the render sticks to it it gets heavy and peels off or is too loose to spray behind pipes. Any help? Cheers
Yes mate it's defs e grade with a clampable stator. Only used it once like but was torture and out me off it a little. It is likely to be my inexperience like so hopeful I can get it running k rend a dream!!
Not that I know of??? Using the clampable stator at the moment. Must admit only used it for 1 k rend job the rest been other products and runs a dream. Might see if I can get a few bags on the cheap and have a play about with it to get it right ..
Hi, recently bought a Ritmo m. Spraying like a dream with Parex, weber etc... Done one job with k rend spray e grade and was nightmare!! Obviously the silicone gonna cause problems but got a lot of k rend jobs to do soon so anyone got any advice on the settings etc on how to get the best out if...
Nick wot settings do you use on your Ritmo to spray k rend?? Only tried k tend with mine twice and it was nitemare!! Been using Parex but need to do a few k tend jobs ASAP cheers mate
Hi,got a scratch back render job to do on a farm house. Thing is the customer doesn't want beads and straight edges because inks would make the house look too modern. Any ideas on rounding the edges baring in mind I have to scratch them?
Hi, can microgobetis be used with other monocouch renders like k rend and weber? If not do k rend or weber spec there own bonding agent. New to rendering and noticed lads here aren't using basecoats but just using a bonding agent or sbr and putting topcoat straight on. I've been using basecoat...
do weber push you to use basecoats keith like k rend do? all they seem to say to me is base base base. but parex say most of time i can just use microgobetis. what do weber spec most of time on the likes of house brick?
oh are they just hammer fixings gibbo that you use to fix laths? drill and hammer them in? whats ewi keith? just thinking if the dash was to be removed could i get away with using k rends version of sbr think its called rx7 and then just applying the topcoat straight over, or if i go with parex...
thanks for the very helpful reply duc you seem very experienced!!. this would be my very first lime rendering job and i have sort of committed to the job even though it is new to me. couple of questions if you dont mind. what is zone 2 grit? what is kane brush? first of all is that what you call...
Hi,I have to lime render a conservation project it's a house near the sea so the council insist on lime render. Anyone tell me the mix ratio and they want 3 coats?is this correct? Also, I have to coarse the bricks? Apparently I have to score in the appearance of large bricks anyone know how I do...
Hi, I've got a house to do in k rend scraped finish. The front and side are pebble dash. The back is painted brick. Anyone tell me how to go over it? Ans the thicknesses? The customer insists on not taking of the pebbledash and to be fair I've checked and it seems quite solid. Please help! Cheers
You saying rx7 no good for over paint spunky? I got told microgobetis can be used if there is too much suction or no suction I.e over paint? What's ya thoughts. I'm sure a company round here uses rx7 over paint on a job I seen done before Xmas?
sorry mate just read your last post!! sorry if doing ya head in jus ignore me if ya cant be a***d :) just always worked for myself so love learning from the best! like a kid with new toy on here! al give you rest, cheers for ya help anyway.
jus one more thing nickelarse...am i right in thinking if the substrate is new blockwork i can go straight over it? if i was unsure i guess a quick going over with the micro or equivalent wouldnt hurt? cheers
cheers again nickelarse, is this sbr slurry an equivalent to using the micro or is this totally for a diff use? just wondering how much sbr i add to the 1:1 of sand and cement, how thick should it be for me to brush it on? oh, and cann i use any type of sand? if i was to use the micro for...
cheers render systems...does that do exactly the same job as micro? noticed on your site you approved lime applicator. is k lime any good? im told they offer 3, but have been told to use the middle and last of their lime products rather than all 3 of them. got a job to do and lime putty or...
hi nickelarse, what is best way to k rend over paint then mate? im new to this but they defs put k rend topcoat straight over brick after brushing something onto the bricks. on the morn it was painted brick, two hours later it was polar white topcoat so defs no basecoats used. also, what is this...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.