Search results

  1. S

    Hilti collated

    Anybody know if Hilti have made a collated brushless version yet?
  2. S

    Ceiling advice

    Hi Stookie As Olican stated, don't put a ceiling on in sections. If you are unsure about keeping up with it, give it a few coats of pva, allowing the first coat to dry completely first, and second coat slightly tacky before skimming (3 to 1 water to pva). As you are probably aware this is not...
  3. S

    ripples in skim

    Hi Ankers, If you put your second finishing coat on too quick without allowing your first coat to stiffen up then you can run into problems and generate 'ripples' in your work due to your finish being too thick,soft and unworkable. Try leaving your first coat to sit for a little longer and...
  4. S

    thistle bond it v febond blue grit v wickes bonding agent v pva water sand

    never tried useing an old hat before, does it work? :RpS_biggrin:
  5. S

    Is ok to replaster over old but solid plaster?

    Hi Macgrl, Personally at this stage if tiling, I would remove all plaster from the walls back to the brick, Brush the brickwork down to clean it all up, Then paint on with a roller a key priming product called 'thistle bond it' this needs to dry over a 24hour period, it will seal up the...
  6. S

    Darby's

    your walls are probably winky wonky then! :RpS_biggrin:
  7. S

    Just found the forum

    Hi all Nottingham spread Brand new to the forum stumbled across it after following a link from one of Danny's sites Best regards Gavin :RpS_thumbup:
Top