We are looking for labourers to work with us in and around Kent.
Ideally a younger lad with transport. We are based in Medway
We are hoping to find someone with the right attitude who we will place on a college course to gain NVQ 2 in solid plastering.
Call Steve 07837755801
leave a...
Hi guys has weber ocr got waterproofer in it?
Need to do a scratch coat for some dashing and would normally use CPI which has s**t loads in but can't get any for next week
Looking for guys to work on a high end project in central london. Cscs card needed.
We will be using airless spray plaster and are looking to show decent guys the system with repeat work in the future
Anyone interested mail me
Steven@currier-plastering.co.uk
Been spraying a lot of pre-mixed with the ritmo through a 19mm pipe and skim gun. Its awesome so we are now looking for the bag squeezer attachment.
Prices?
We are looking for guys to work with us on various projects in Kent/Sussex/Surrey.
Internal new build float & set as well as skimming
Refurb float and set + over skim
External mono and acrylic work
We also undertake airless plastering which i need to be training people up in ( no experience...
Hi guys can someone with a ritmo m or l give me a idea how big the inlet hole is on the top inlet?
At the moment we are running without the plastic insert as we only had a blanking cap in the top inlet when we purchased the power coat.
I'm having issues with wet mixes when we stop and then...
We are looking to take on some apprentices. We undertake all forms of plastering and rendering. We will want them to go to college etc.
If anyone is interested or knows anyone send me a email
Steven@currier-plastering.co.uk
www.currier-plastering.co.uk
Just looking for confirmation that its fine to render over a wall with s+c on a wall that has lime pointing.
One of the render manufacturers is saying we have to use lime render.
Any truth in this?
Hi we need a taper with a automatic taper (bazooka) to tape in front of us so we can follow along after and apply Knauf Airless Plaster. This is just to apply tape and fill tapered board joints.
Also need someone to follow with a sander and vac
The job is in Kingston London and is ready to...
Can any of you PFT guys give me a ruff idea of the price for the medium hose for the Ritmo? Don't want to be using the chunky hose that needs the adaptor on the gun. Also is there a r/s for the Ritmo which will slow the delivery of acrylic down a little? Would be helpful if it wasn't so quick...
Hi guys I have customer that wants a smooth finish to his DPR. Smoother then the samples he has been sent. He has mentioned that Parex have told him a stainless float may help. Any one have any experience in this?
Thanks for any help
Can you form a movement bead out of 2 stop beads in a acrylic system? If so how?
My understanding is that a specialist movement bead is used with a pealable protector which allows for a 6mm base up to each edge. After a topcoat is applied directly over the top and once its semi set the...
Has anyone ever experienced brush marks in Blanc du littoral before.
scratched back lovely then I brushed it and now have what appears to be slight colour variations where I have bushes up and down. Is this normal? Will they come out as it drys?
Have to post to congratulate @british Gypsum.
Your Thistle Spray Finish is now excellent. It sprays nice, flattens a treat and is easy to trowel up. Please take note that the extended set time I have been experiencing over the last few days is exactly a required. One large hit is the way...
Looking to work with GOOD spreads in the South East.
We currently have numerous skimming projects that we need a hand on starting next week.
MUST HAVE CSCS
If your interested please email me steven@currier-plastering.co.uk with your details or call me 07837755801
Looking for some technical help regarding running 110v stuff. We have a 110v ritmo and have to use the chunky 110v wires otherwise it's internal fuse blows ( not sure why???)
Anyways I'm trying to run the Ritmo 16a, water pump 16a and air compressor off our genny together. It's 7kva so think...
Doing the internals of a school down in Dagenham and am looking for guys to join one of our spray crews to help move the project along at a good pace. Spreads + labourers.
It would be beneficial if you have used MP Finish before as well as speedskims and spats
Start date is in about 7 May...
Hi all Ive just got the internals of a large school down in Brighton, Portslade and am looking for guys to join one of our spray crews to help move the project along at a good pace. Spreads + labourers.
It would be beneficial if you have used MP Finish before as well as speedskims and spats...
Hi guys look for tis and adviseof others that spray acrylic top coat. I sprayed with our ritmo for the first time today and wondered what settings anyone else uses?
First tip from me is make sure u have enough access! spraying in tight areas is difficult!
Danny my enter buttons don't work to finish a paragraph. This has happened since a IE10 upgrade. Don't know if its IE fault or the forum software not working. Anyone else having issues. ps the button does work in chrome
I have just talked ourselves out of doing a floor screed by hand and have recommended to the builder that he does a flow screed.:RpS_thumbup:
So we are looking for someone down our way to come and do a flow screed in Ashford Kent. Its only two flats with a total of 135m2 direct to builder. Be...
:mad:
14 Pallets CPI ordered for delivery to site by 7.30am. Access is only available to 8.30am as its a office car park.
No Show
4 Blokes sitting on site waiting for it, to unload and then spray this afternoon.
Muppets!
Thought we should share info like this
Just used this on painted rough cast and have to say its excellent and though some people may be interested in our results if they have never used it before.
http://youtu.be/aReyFQQTuSw
As the title says really looking for a decent company for flow screed that do work in the south east and london. Would rather use someone recommended then just pot luck.
What would you guys think is a acceptable lead time on quite a few pallets of gear? I feel let down at the moment and just want to see if im being unfair on not :confused:
Hi guys we need another machine for spraying finish so was wondering if anyone knows of anywhere that hires machines capable of doing this? Another ritmo would be best however any make or model would do i justy need to be able to hire something for the time being. It doesnt even have to be able...
Hi looking for anyone else in the south east with the capability to spray BG Thistle Spray Finish. We are getting a lot of interest and will need to sub contract some work out soon. Pm for rates.
Hi been asked to price for spray finish on a lot of prefabricated concrete in a school. Whats the normal spec here? we only have the bill of quatities and it very vague.
Im thinking its either mp75 or thistle spray finish with the conrete primed with Bond-it.
Any thoughts from guys that have...
Right ive been asked for a method stament for the Ritmo spraying finish. What is this and how the hell do i get one?
Also they wanna see certificates for all electrical tools, same question what are these and where do i get them. Im guessing its PAT test but all our stuff is brand new.
Im...
I can't wait to go back to work tomorrow! Christmas has done my head in this year, since mid december everyone seems to shut down just when i wanna be making progress.
Does this make me either
A: Workacholic
B: ****** Up
C: Old enough to not care about christmas
Hi guys just checking that our 110v Ritmo will spray this stuff ok? Its the same a cpi but we are getting it for a fantastic price as the bagging plant is only 9 miles away so no delivery charges :RpS_thumbsup:
Has anyone used this before? I think gibbo said he had
Which is the best genny for the 240v ritmo m? Can seem to get the answer through searching and need to know before i got to the bank manager next week
thanks
We are looking to get a ritmo and need some more info about purchasing one. We are based in to south east is there anyone round that area that is a supplier?Can you lease them?Anymore info on this new BG spray finish?Any info greatly appreciated
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.