Search results

Best setters I've had have been carbon. The metal remains true. Some SS I've had have warped. Normally once they have become good for setting.

Hi all Looking for experienced trowels only . Must have CSCS. Spec : patching , BG grit and over skim . We are refurbishing communal areas in a block of apartments, Park Lane. Must be able to bond out and rule to a high standard. Hours are 8 to 3.30. Also have mono and plastering jobs...

Hi all Looking for experienced trowels only . Must have CSCS. Spec : patching , BG grit and over skim . We are refurbishing communal areas in a block of apartments, Park Lane. Must be able to bond out and rule to a high standard. Hours are 8 to 3.30. Please call Mark 07768311650 to discuss...

Hi Ant I'm in West Wickham

All done today . 70 m2 . 2 hours . Went down a treat .

Hi all I have about 120 bags of Nu Heat latex to put through the Mtec M300 Any body done this , and if so what setting on the water worked for you. Thanks Mark

Flexi screed F 0 Ardex A35 Rona crete 1 day overlay

There is a lot of stuff in that building at 100% relative humidity . I would suggest gauging your fine stuff with plaster of Paris to make it hydraulic . But only if your float coat is 100 % dry .

110v with negative paddle please Ryan plus 1 x 18 Nela super flex plus 1 x bonus tool !! Thanks Mark

Good drill !! On the subject of over spin. Leave the drill in the plaster until stopped. The plasters viscosity will rapidly reduce the drills spin on, after power off. Why would any one have a drill still rotating after they have removed it from a mix, apart from wanting to Tyrolean the...

Get yourself a a waste carriers licence and register with the environment agency . Tel 08708506506 mark

Bet it was them fat boys ! Again .

All done gary . That present you gave me was the nuts ! Steve is really good at using it lol .

You said you wouldn't tell gary .!

Superb workmanship !

Found some .

I'll pop some pics on .

You ain't right mate

Purchased an M Tec from Ryan 4 years ago. This machine has performed outstandingly , never missed a beat , only had to replace wear and tear parts such as the R/S , spray nozzles and dossing screws. Only negative I have on this machine is that it's bulky ness and small wheels make it awkward to...

Any room for another one ?

Yep ! Free lime molecules assist in self healing . but we are talking cement based here , using a combination of shaped memory polymers , micro capsules and bacteria .

Could self healing concrete crack technology find its way into the render market. one to watch ! https://go.madmimi.com/redirects/1404117923-a8ee3a3a6ef764fce9047c5c35ac137f-b766837?pa=23595264673

Got to be spot on !

Experienced thin coat applicators required to help on ICF project . Just off junction 5 of the m25 Kent . mark 07768311650

How you getting on with the Ritmo Andy ??. Has it made you more efficient ?? and a better plasterer.

I was reading through Millars the other day. I couldn't find any reference to plazi this and flexi that. Are we just re inventing the wheel here??

What's wrong with using a normal trowel then ??

Looking for good trowels. Kent projects around Orpington. Roughly 4 to 5 weeks work, maybe more. Good rates paid. Quality expected. Pm me for details or call Mark 07768311650

How low can you go ??? . I've done as low as 10mm . Well bonded .

If you have the tolerance , which hasn't been established . Just lay a traditional Sbr modified screed , to a cement / SBR slurry . Go 25mm on highest point to 75mm lowest point .

Watch how you cast. Cast straight on . Go up, down , left or right and you will distort the butter coat . And it will all look **** . http://youtu.be/DhN67TV5xM4

£4.65 plus vat Sheffield Insulations . By the ton price

He's right . Or antiseptic cream. Just keep your feckin gloves on in future lad .

Sound like you've been to soft for too long Rigs.

Christ Kirk.. You've got to get with the times and get a projection machine.

Im getting old Andy :-(

James, We have a 180 m2 bungalow to do in Sittingbourne in about 3 weeks. Pop your head, run the barrow for a while, and Ill give you a few pointers.

Good advise. Should end up like this

If He has added it with a straight joint and not toothed it. Id suggest a stop bead 5mm of the existing dash , and tell him its a movement detail as its gonna crack there any way.

A word of advise. If your zero rating invoices for " new build " , make sure you gather some proof that the contract was new build. If you have an inspection you may be asked for evidence. A copy of the completion certificate will suffice.

Had some northern monkey convince me to by a couple of boxes the other day ( with some mandatory PVA and dust sheets thrown in). What a pile of C***p

That sounds like inside information. Are you their R & D chief tester ??

Its got to be Parex with out a doubt, these days. Call their representative covering your area and get a specification of them specific to your job.

The questions you are asking here are like " how long is a piece of string ?" . The work will take as long as it takes you as a gang. Are you fast or slow ?? I get the impression you have a limited experience with ornate rendering work. So with that in mind I would strongly recommend you over...

I see Dom...ino has moved to Sheffield !

Get on with it Scots....MTFU your a tough mudder after all !!!

Hope this helps. Lime lite is a cement based light weight pre mixed plaster.( not lime) Having a fairly small aggregate size , we put it through an M Tec 300 no problem at about 750 on the water. ( I guess it will go through a G4 ). If building out heavy, at least 4 days plus between coats...

Sometimes...a silly piece of polypropylene mush just doesn't cut the mustard. 1870 s property sitting above a Victorian train tunnel. :RpS_crying:

Flexidry f0 FlexiDry Fast Drying Floor Screed Calculator Advise architect first .

Freebies you say . Excellent . I'll have 30 bags of topcem please sir.