Sorry just re read your post
As you say mate your job was done.
I would tel the customer to ring said plumber uless he was sub contracting to you.
And explain he has stained there grout they would sharp ring him if he walked oil throught there carpets.
Offer the customer a soulution and tel...
Re do it and Seal Guard it do a search for it its exspensive but fantastic.
suprised the grout stained with that is it water proof grout
What area is it ?
Just been to look at a flat I skimmed over 6 months ago.
Full re skim walls and ceilings uni bond and skim.
There is hair line cracks appeared all over the place, on every wall in the flat and some ceilings .
The cracks are hairline and go vertical horizontal and at angles and the plaster can...
How do folks
Been to look at a job today they have got damp on an old extension single skin brick with render on the out side.
The render is in the house next doors garden and caries down the party brick wall and its down to ground level. I will be removing the lower section and fixing a bead...
12.5 for dabing and ceilingd unless space is an issue or profiles
price of board should not be an issue its the right tools and gear for the job always
PVA joints
Skim in two if needed plent of water on the joint and brush it in.
Give it a mist coat of paint when dry
if there is any snags catch them with easy fill and sand
He new there was a rabbit off from the start
All sorted now the guy came back out and tryd to say he had done it and ask if we wer trying to pull a fast one after a bit of talking to he admitted to not doing it >:( and asked if he could come back on monday to put it right :o and he would need...
Read the thread before you reply with a view let alone a pointless one ;)
cheers to the the other guys for the views hes got him comming back today am gona pop in and have a word also
Yip straight up seen the quote a guy got, worked out at £900 to skim a bathroom
When the guy said are you re boarding floating etc hw was told thats what it costs what ever is required ::)
p.s the same went for tiling :o
Cheers Lads
Its definatly not been drilled from outside as hesaid he could not get to it because of the bushes at the front of the house, on further inspection of the walls tonight there doesw not apear to have holes drilled any where there are a few old holes but these do not show signes of...
Hi yall after a bit of advice on a area of plastering am not to fimiliar with
My mate has had a damproofing company in to inject his walls and render up to a meater ish,
He could not be on the job when they wer doing it, but when he poped by on his dinner he asked them if they had injected the...
Rolling set as already said nothing amatureish about it at all its a part of plastering and covering big areas where there is no angles, joining walls etc
Yeah split screen panel 1962 prices range from 4k ish for a shead to anything up to 60k for a samba or barndoor
thats worth around 12k. finding a decent commercial van over 40 years old is hard you just have to look at some of the 2yr old vans that come up for sale that are used for work
Second that with the T4 Cracking vans converted mine so no good for carrying the 8x4s ;D
Got a t5 for work and would also reccomend just mine has had new gear box clutch and fly wheel under warrenty before i bought it its now done 90k so be care full on buying second hand or buy one with the...
Laminate and stilts :o dident bother with sheets :o
I will stick to me hop ups never had a problem. did once work with a guy who used them 'can you pass me this can you pass me that'
For me Iam out
Take along a plasterer with you to sort it out ?
Keep the heat off if poss
More PVA
Apply a better coat of finish
check what you have done is all sound prior to doing all of the above
There will come a time,, but ?
Yeah its totally different to Multie doesent like been applied thick
Its good for new boards on say a conservatory with new white frames its cleaner than BG multi
tom
Not sure if its been disscussed before but hey ho
Havent used it for years
We used it on site when house bashing on boards not so good on re skims in my opinion
Got to mix it thick to start as when you knock it through it thins down.
So who uses it regaular ?
Your thoughts?
I recon it was all to do with the prep and your technique nothing to do with the mix as you said it was mixed ok ?
did it suck in in sections or what
what was the background ?
Got to be a wind up that
Oh yeah as for telling lads they need to go back to college,
there is a spell checker you could use 'good or what' or you could always go back to school ;)
So who's done one then ?
What did you learn ?
How long was it ?
Remember when I started my apprenticeship around 99 after a week I was knackered and nervous about knocking up a mix (in case it was lumpy or sloppy etc) never mind going into it on my own as a living, saying that think i done my...
Depending on the pattern etc
Scrape the high spots
pva
tight coat of bonding (maybe a hand full of lime added)
two coats of finish
trowel to perfection ;)
job done
Very rarely over board unless required, which is not that often in my experience
Yeah my thoughts aswell apart from all me tiling gear wet cutters dry cutters my makitas etc
and the fact they will have to brake into it to find out there is nowt worth nicking
always get business insurane on me van
normally get a better deal aswell
As above but Multi purpose will be fine
Does what it says on the tin
Why you ask ?
Edit:
Post above was added be fore i submitted mine used both with no broblems on board ever.
We used to use a board finish with carlite added on most jobs before multi
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.