Search results

Members online

  1. spongebob

    i know its been done

    seems colour dependant but about 250 (y)
  2. spongebob

    K rend hp12

    Once it has been primered and had a top coat it will be fine !
  3. spongebob

    Repairing crack in through colour render

    The crack is down the edge of the bead rigsby it looks like he has bashed the bead outwards whilst fitting the frame Rendit gear is the best chance you have got of mending it or i would be tempted to render a band over each side of the door to make a raised feature probly about 9 inches wide
  4. spongebob

    110v Compressor for Ritmo

    Are you the fat one or the grumpy one ?:RpS_confused:
  5. spongebob

    k render a few question

    Minster at maidstone will be the best place to get krend ! Beads from G and H supplies near bean :RpS_thumbup:
  6. spongebob

    Krend on timber frame

    Renderlath is a complete cock to render over and will probly need two coats of base to get it good enough to mono
  7. spongebob

    Thin coat on concrete advice.

    Sorry i couldnt resist !:RpS_blushing:
  8. spongebob

    K Rend Spec Help Needed For New Job

    Phone krend and ask them to spec it for you :rolleyes)
  9. spongebob

    Sbr parex microgobetis?

    Krend used to spec r7 to use on smooth concrete so i dont think it is just a sealer spunky , if you put the first coat of krend into it whilst it is still wet it all becomes one on the wall a bit like putting grit into it
  10. spongebob

    Sbr parex microgobetis?

    Rx7 is similar to unibond in the way you would use it but much stickier and it will kill the suction, Ive used it over painted bricks with no problem but you are still relying on the paint sticking to the wall ,ive used it on smoth concrete aswell !
  11. spongebob

    Sbr parex microgobetis?

    Krend do there own primer called rx7 ,You could apply that then put your two coats of krend on ! Its not as good as using a base coat but it works ! and probly comes out cheaper
  12. spongebob

    made me laugh

    Your Asian !:rolleyes)
  13. spongebob

    Tumble weed

    Seems to be a bit blowing about anyone notice it
  14. spongebob

    3 phase Genny wanted 15kva minimum

    :RpS_laugh::RpS_laugh::RpS_laugh::RpS_laugh::RpS_laugh::RpS_laugh:Big nose you should have spotted that !
  15. spongebob

    refina pluss 3kva

    Have you any pictures of it ?
  16. spongebob

    what a day

    That was dated 2004 :RpS_sneaky: ! Weber have changed their spec and only require a stress patch on the corners of the opening now :rolleyes) and mortar bed reinforcement
  17. spongebob

    G5 and/or 3 Phase genny

    Ill start the biding with a tenner is delivery included ?
  18. spongebob

    Machines for sale

    The level of service he recieves from cheltnam will make up for it :RpS_lol: Buttered to hide the mold !:RpS_sneaky:
  19. spongebob

    Machines for sale

    I thought rocketdog was buying the g4:confused: When you get desperate ill give you a jar full of pickled onions and some stale bread for it, but only if you chuck the genny in :RpS_cool:
  20. spongebob

    repair

    Pot of glue stuff is about £13 i think cant remember how much the paint is but both are a very good product
  21. spongebob

    repair

    Have a look here Rendit | Render Specialists | Render Repair the one you wont is the flexible infill fissure or something like that :confused: Its like a pot of superglue and you just squeeze it into crack then dab at it with the end of your setting brush
  22. spongebob

    k rend

    Ive never seen anything fail on r7 :RpS_scared: and ive used it to do some really wrong things !,you would think with r7 and then tyrolean as a key that would have been a good base Did the hp12 not stick to the r7 or did the r7 fail ?
  23. spongebob

    k rend

    If its dusty and in a mess i would r7 it ,if its clean brick i would just get on and base coat it I bet the r7 is well expensive aswell:RpS_wink:
  24. spongebob

    k rend

    Id go with the hp12 and mesh !
  25. spongebob

    machine labourer

    Pm southenmonkey or simps ,You never know you might be able to get a lift:RpS_thumbup: mention food and he will probly pick you up:RpS_sneaky:
  26. spongebob

    spunky

    sorry Baaaaaaa
  27. spongebob

    spunky

    hey blones is that you in my avatar
  28. spongebob

    spunky

    Simply cant get on here at the moment :o But im sure sprayit will be along shortly ;D
  29. spongebob

    spunky

    No but it looked like a cheap way into it
  30. spongebob

    spunky

    That makes two of us ;D
  31. spongebob

    walking on stilts

    Are you sure you are moving them the right way ?
  32. spongebob

    Weber OCR

    Pug what do you think is in a bag of mono ??? ::) ::)
  33. spongebob

    repairs

    You would think the fat c**t that sold it to him would offer to help him for free wouldnt you monk ::)
  34. spongebob

    cpi general purpose through xl

    You would think that pft wales would stock d42,s ::)
  35. spongebob

    HPX

    I cant remember ! Very similar metreages to krend or weber so at a guess id say 5 m2
  36. spongebob

    HPX

    Cpi do a base coat called highbond but its more like rendaid than hpx
  37. spongebob

    Tree Bark affect

    Put the high build on with a trowl then use an ordinary painters roller with a cut down mastic tube over it to put the pattern in ,the smooth tube will give you the effect your after
  38. spongebob

    d+d m/r boards

    You can stick mr boards just the same as any other board mate
  39. spongebob

    Rendering over painted brick.

    Krend make hpx so thats why you would use it ! mixing differant brands is pointless :-\
  40. spongebob

    looking at a barn conversion job at the mo

    Im not up on these renders cos i dont like the finish on them and think there s**t but that said could you not put something like the stoarmat classic over the sand and cement with a mesh in it then top coat ?
  41. spongebob

    ptf

  42. spongebob

    rend aid

  43. spongebob

    look at this idiot

    You have made him delete his account now you bullys
  44. spongebob

    Blown Render

    Yes rendaid is the scratch coat for weber
  45. spongebob

    Blown Render

    Madmonk Why would you wont to base coat over rendaid ? Richard i love you and im sorry :P pristine stick to 1 type of render and dont mix the systems ,try ringing weber and tell them you have rendered over s/c and see what they say ::)
  46. spongebob

    Blown Render

    This guy has rendered over sand and cement with weber which is pretty stupid at the best of times Then another comes along and tells him to use weber rend aid with the magical mesh in it followed by a base coat made by krend Then richard will be along in a minute to ask why these through coat...
  47. spongebob

    site opening times

    Hit it with a space heater for an hour or so that will sort it for little cost
Top