Search results

I like my machine to stay shiny too much to put rendaid through it. Don't take long the old fashion way

The cooker socket in the kitchen is the best, if your having trouble on other sockets. But never had a problem so far. Genies do make a racket, especially if you have a early spray

I empty the butt, fill half way with clean water, then take the water pipe to the mixing chamber off and press the water button for a few minutes. Then everything gets washed through including the pump & hoses.

Do you use a spat after using a serrated rule? We used to get lots of air pockets when applying by hand, but since spraying it on we get virtually none. Also I've seen different serrated edges with deeper teeth. No idea if that makes a difference, we've only ever used one type

Is it speed 5 on the ritmo Ian?

http://www.preloved.co.uk/adverts/show/116228243/twin-axle-box-trailer.html?link=%2Fclassifieds%2Ftrailers%2Fall%2Fuk%2Fbox%2Btrailer Don't know if something like this is too expensive or not Just need 4 wheel clamps

It is Rob

Yeah Mike Atthis has got a ritmo, and I've seen a picture of the paddle

I think there is one out already. Might be worth calling a pft dealer. Think Mike has one

You only sell 240v power tools then?

If it's new work then I would use rendaid if your going to base coat first, and you get so much time to put your mesh in, if that's the way you do it. Yes it is more expensive, but goes a long way on new work. Never had a problem spraying with Weber pral. Don't go alone on your training day...

https://www.abis-uk.com/1000mm-wrapping-paper-counter-roll-holder Would that work?

Would you have a rough idea what one would cost Ryan?

Pft dealers are top draw. You will ring them up with a user problem, you'll feel like a burk, but you will ring them. Video the demo and take notes. Don't go on your own, you'll forget it all. I just couldn't face hand balling again. It will be worth it. The ritmo is just brilliant

It was upstairs though Mike

What accelerater did you use. We use wickes, which I've found to be one of the best. We used a different make the other day, didn't do a thing. After reading the label found out it needed double the amount as others. So it's worth reading the label. Wickes is reliable

Oh right, 33 years I've been a silly unskilled t**t

We've always used wickes. It's been reliable for us.

4.1.1 scratch coat 6.1.1 top coat. For rendering.

Is there a crack free render? Not heard of parex cracking, but it's more ££££

What kind of probbs have you had Mag? Just curious if they've been the same as ours ( user error)

When buying a machine, there's 3 words you will need to remember Backup, backup & backup. You will always need to call for advice. There will things you forget. Whenever I've messed up and had to ring pft southern its been sorted within a minute everytime.

Yeah but that's for half day bags Mike. Lol

If you do use it, make sure you leave it for 3 days before top coat

£6.20+ at minsters

£15.35 + at minsters

Keithuk uses 2 bottles per water butt for weber, parex will be slower than weber as you know. Need at least 2 bottles for parex

Where abouts you getting gp mortar for that price Rob?

The only way we got ours out was by putting the blade in a vice and use a mallet to gently wack the end of the alloy section. Didn't do any damage Also left in soak overnight beforehand . But the new blades make life much easier

If your on your own, without doubt film it somehow. Might fell stupid doing it, but there will be things you forget for sure

how long can you spray rendaid before cleaning the machine. When manually mixing it by drill, you need to keep on top of keeping tools clean

What sealer would you recommend #keithuk

What surface was you going over Mike, and you was still able to i bar it ok next day?

Hi @Keith do you always manage same day scrape throughout the year with Weber, and a touch of special juice.

Thanks chaps

It was the general purpose render

Hi guys, would anyone know of a stockist for bags of euromix Render in the north kent / se London area. Only need about 10 bags to try

Does @Danny still do websites?

Tape and drape

Is thin coat more, when pricing up? As i only do mono

Would need to mesh as well as to wire for sure or it would crack without doubt.

Eml over the ply first. Done dozens of them, we've never had any probbs with cracking.

You can ply instead of the cement boards, then eml wire over the ply. Scratch coat 4.1.1 sand,cement & lime, render MESH all the scratch coat, then smooth render top coat 6.1.1 use plastic beads

Must admit, do get fed up with all the agro that goes with hand balling it. If a machine runs sweet, then it has to be worth it. They would be Krispy Kremes keith

Whenever it would be convenient for you keith

Lol, i bring some when i bite the bullet. Thanks Stuart

Yes for sure, would it be ok for 2 of us keith, my younger brother always brings the donuts.

In gravesend keith, near dartford. Yes that would be massive help.

Theres 3 of us keith, and it is hard work. Love to get a machine, if you can earn a few more pennies to off set the 7k cost

Hi guys. We hand ball 20 - 30 bags of mono a day doing domestics. If using a machine your doing over 100 bags a day, do you earn five times the money?.lol. I love the idea of getting a machine, but dont want to get one just to earn the same amount as i do now. Or is it just because it makes...