Search results

@bobski thanks for the recommendation mate Kentish I'm too busy till end of October beginning of November, so no chance getting to any jobs before that, if you need a hand then you can give me a.ring on 07504680057, cheers Zol

Thanks to @vfr12 and Kevin for giving us a hand on Saturday. And the rest of the gang who didn't show f**k off :ROFLMAO::ROFLMAO::ROFLMAO:

Cheers mate, got a festool planex, will see me out for a while

Think got the firewood covered here

Great to have you on board (y)

Why you have to come across like a dick every time you comment Mr perfect? Have a look retro fitted ufh then f**k**g comment

Yes mate, without that only product to go over with is mapei's tile adhesive. When you get a spec from your supplier it will be included in there what materials suitable to cover the trays and pipes.

You have to prime the pipes and trays before you screed with primer as the the insulation/aluminium foil on it can react with the screed if you thinking to screed over it at all, or you can use mapei tile adhesive which contains epoxy but it's about 50/bag and you will go through a lot to fill...

Kevin wasn't very good then by the looks of it

As megamix says, grit then bond and skim

Wundafloor Omni floor Schulter all very similar, trays and pipes will need priming before screed, then for good measure fit decoupling membrane before tiling

It's called undercloak

That's the clemrope mate

Course I will

Hence you should grab 3 and take it upstairs (y)

Of course you do :ROFLMAO::ROFLMAO::ROFLMAO:

I find working on private rentals bad enough sometimes and because of that i don't want to know how bad is social housing tbh.

What have you done to it? Tried lifting your wallet?

If there's plenty money in the job use Walter strong liquid masking

Ah I see

Why you want to carry surplus boards? Just tip it on the job, if you have too many chuck it in the lock up. these racks are best

Try this mate you'll love it Folded boards

And I thought my year was bad

Just over 350sqm, 18k it cost in the end to have it stripped and redone properly about 7years ago

If you keep patching it it's bad economy, you end up paying same or more for that than renewing the roof especially if you keeping it for at least for another 10 years. Mrs used to pay 1-2-3k every year to have one of hers patched, in the end was easier to shell out for a new one

I'm disappointed that you didn't put the walls on at the same time:inocente:

Piece of cake to replace the flashing mate. You have some silicon in the corner could be that, wall full of hairlines, flashing could be not deep enough, if you can see it inside where the water gets in that will help even if you have to open up the ceiling

Seen it yesterday on FB someone has them already Gary

Probably 80 a piece if he's lucky, got 3 in a house so 200 extra, takes longer doing them than lashing on a.full room

Per piece

This is what you need around £150 IP rated 270° light, first one on the video is a scangrip 5k the second one is the floodlight Enlight industrial flood light

I think there great, with the SF you can almost finish

@essexandy, @Builderboi could be one for you

Merry crimbo Ryan

Top drawer(y)

Nothing tells you I love you more, than a mismeasured unit fitted. Board under the catnic and.on the timber, float and skim the rest

About £3.50-4 supply and fit or 2-2.50 labour only as a subbie

This thread like tennis

Their recommendations worth as much as the paper it's written on

Sounds like Ray is a t**t a tad

How can you take pics of the wind?

Good luck not the best time of year looking for work good luck

Put the Wacker plate over it or sponge the lot

@theclemo your favourite subject :X3::X3::X3::X3:

It's less than 100quid for a small claims under 10k value

It's not always true tho. If you can secure a ccj against their name will make their life difficult if they don't argue with the small claims. I had a customer who digged their heel in paying their last invoice, only 4k, solicitor said it will cost me 10k, 18months to recover the 4k on high...

Cheers mate, only mentioned it to cheer him up and let him know he's not the only one out there

How much you out of pocket?

You be fine, just leave it all behind you