Great thanks guys. It's almost dry throughout apart from one bit which was the main spot of damp /Efflorescence so will give it until early next week then skim over and post pics
Waiting for cement to dry out fully before skimming, been around 6 days so far is this normal? Seems to be taking a while. The waterproofer admix i added did have a retardant in.
That's a great idea thnks; I will. I've always been impressed by the friendliness and helpfulness of everyone in this forum. Could have got original plasterer back to fix this but given what he did the first time I'd rather trust myself to do a better job!
So have brushed salt neutraliser on...
So ive just hacked the paster off, and he hadnt even bonded it. Just skimmed straight onto the brick. As the bricks were sticking out unevenly some parts of the skim were over 1 inch thick. Have washed bricks with salt neutraliser yesterday and going to s/c later today. Should i add a squirt...
Ok, so ive got a litre of anti sulphate,his stuff: http://www.ebay.co.uk/itm/SALT-NEUTRALISER-ANTISULPHATE-TANKING-BASEMENT-WATERPROOFING-/181418700431?var=&hash=item2a3d65ae8f
and the box says to slap it on the brick (I assume undiluted) and leave to dry. It also says to slap on plaster, I...
That's great thanks. The only thing I need to find now is a decent cheap salt preventer chemical near Sheffield for the tiny amount needed; any recommendations do trade point do anything useable?
Oki think ill try the sand cement method, what would be a good walkthrough? Hack off, wash bricks with salt preventer, leave bricks to dry out few days, plaster sand cement (ratios?? I have no idea) then multifinish skim on top. Dont want to board will be much easier if I can skim it
Any help in this is much appreciated!
The alcove wall in the upstairs bedroom was getting very bad damp and efflorescence problems. We had whole of upstairs replastered. Before I had the plastering done I hacked off the plaster on this bit back to bare brick and had flashing replaced on the...
Any advice is much appreciated. I have a new light fitted, 10 x E27 40watt filament bulbs. Its this one: 10 Lights - Edison Chandelier Pendant Lamp Ceiling Light Bulbs Remote Control | eBay
I have now fitted 5 dimmer switches and not found one that works. Leading edge dimmers buzz really...
Hi all advice needed please! I have stripped my hallway and exposed some old concretey crappy plaster underneath but mainly solid. The rest of the hallway has been drylined and looking fine. I want to have a go at skimming this wall as the victorian stringer going up the stairs is original and...
Thanks guys that's the reason this forum is so good, quick concise friendly answers and advice! I was always told to prime the plasterboard before painting if not skimming and a pva solution was best, or emulsion with 10% water added to stop the joints soaking up paint at a different rate to...
Hi there, and may I say thanks for a brilliant forum! Searching around is great, really helpful stuff. I tried searching this specific problem but to no avail. I am putting a new kitchen in (advanced DIYer) and one wall has a door being blocked up with plasterboard. The wall this is...
Hi folks, new to this forum so amy advice much appreciated!
Im about to start a lot of work on my house so will be posting here frequently I think!
First job is the kitchen door to outside is being bricked up (new kitchen put in) and I need to plaster the doorway over and the wall its in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.