Search results

13x4 gold permashape its the dogs b*ll***s

Should defo go for the skillbuild my mate has just came second down at the NEC he said it was a great experience

Sencos are good but always have to pull back the clip on the front because it dosnt realise propyl somtimes

HaHa yh mate mite help me and shite with writing ha you can learn me to spell while your on with it two ha

this is wat a did mate and if you have the rite attitude its works work hard and show ur determination and come on here for knowledge of the trade like some one else sed employers will come to the college looking for workers and apprentices that how a got started then gave me the confidence to...

its not every thing if you have the passion its a great start but **** re doing level 2 of do level 3 and get on with a plasterer or start doing jobs on your own you should have the neccessary skills now if you are good your dood simple but you need to larn how things work properly now

not two busy me self jobs here and there but have been sub contracting for a few pple as there stacked so a think things may be slowly stacking up

the lads a perfectionist had this happen to me once done a little bit of plastering round a door n it was fine and he starting blasting filler over left rite and centre went back to see how the job was going as the building was getting converted and a couldnt beleive what he had done he had...

its sorted now been in touch and hes going with the tanking systems u mentioned so its good as a can concentrate on the plastering

spot on mate cheers

ave went to see a job today a reasonably small on a small partion wall to skim and sum plasterboard pactching in the ceiling but then he showed me an area were it is going to be a shower the back wall is a two coat plaster exterior wall the side one is a plasterboard wall both been skimmed and...

excatly ashley you mix board the ******* same as multi

heard if you just hook them on without any fixings they tend to moe about while skimming

am not saying out mate rite answear this did you put a full bucket off water to a bag?

mate the list just goes on and on hhaha just joking mate just what the lads sed marshalltown trowel but a wouldnt worry about the makes off the bucket trowel n others

mate you keep saying 9 litres make a really wet mix but a builders bucket is 14.5 litres a think n a use a builders bucket to a bag of multi which a think most pple do so how isthat a wet mix it much hae been stiff as **** what conistency u mixing it to

just gypframe it simple will leave you with a perfect wall and is quick

oright mate well just have to work with it thats the best way imo

just came across this n yes its ******* shite cant build out with it and you have to stand there hold the board in place for **** nos how long until it stops expanding

yh gud stuff was talking to a spread who mixs it half and half with pva to make it go further can you do that

why not buy a pre worn trowel to use on skimming a no these also need broken in but are better then standard trowels to skim with straight off then use your other trowel for undercoats and sand and cement on internals as you dont render unless your one off these so called plasterers that just...

as soon as she sed she wouldnt pay for the materials you should hav put them in ur van and not started til u got it your out off pocket now

a understand were your cuming from like but also just need to learn to deal with it mate

a have a tyzack ready to go but you mt will be fine if broken in

Float and set the thing that gets me with boarding is the awkwards cut your always havin to mate when with floating you just plaster around them plus lets face it its a much harder skill and you feel a lot better when its finished haha

Good cause not to beat around the bush its a terrible product

haha a got a cheap wickes one and thought a was being a stingy bugger but now a see were all as tight as each other good times

never use saves your back always throw it away serves the idiots rite for buying 20 bags then waiting 7 month to get a spread in bet hes attempted to do sum diy with it then realised he needs a pro hah

yh a struggled with tiger stripes to start with mate its all about the angle and pressure you use a love using it though on render and skimming

oreet spot on never new why we put lanko in just sed thats wat the rep had specified so just followed the spec n you bed the mesh into the first coat gooner

lets us now how gud they are a was looking at them butwent with the refina s*p*r*lex witch are brillant on skimming imo but heard these have a more rigid blade might be good for parex or weber

a suppose you maybe could scratch it but a dont no theres no point to be fair just do wat rigsy sed let your first coat firm up then second coat it your second pass should go on nicer and it goes on to 18 mm no bother mate was on a job just a few week ago were we did it you mite wanna put mesh...

Parex is better mate after my recent experience with it

would definatly give it a s/c coat first just done the back off a house hacked off all the render then used micro and rendered with parex the top half came out gud but was thin on a few spots caz off high spots from were we had hacked off so we decided to s/c the bottom half as the bottom half...

been looking these caz there cheap compared to the refina spat but are they as gud or am a worth paying a little extra for the trust worthy refina

used k rend and its alright and as it happens am on parex on sat if weather stays fine

Hard to get the hang off wen it cums to backing plaster a lay the gear on then throw a little water on stick the rule in the corner move it up and down to get a tight angle then procede to rule then fill in the hollows and rule agen after that wen it hardens a little a use a darby to flaten it...

no point with the paper mate just eml and crack on save yourself the time

gutting mate a put a thread up before xmas bout theifs as the lad a was working for was building a house and had all his tools nicked its a nitemare

does any one no any insurance companys that base them self on young people working for them self as am looking to get a small van soon

never seen out like that looks horrible just keep at it lad it can only get better after that jobs

never used a speedskim but a often use a refina spat on skimming and thery are the dogs b*ll***s easy fast and flattens in lovely quality tool and product worth a buy anyday

This i agree with a passion for what you do and taking intrest in your job not just landed at someones house doing the job and thinking your done you should always look to increase your knowledge and improve your self as a tradesmen

unbelievable crazy how gud that is

Av heard a few weeks but like everything theses days pple love to rush but 3 weeks will defo be fine m8

Oright mate don't no much about lime plaster as you can tell haha

Why do you mix the hardwall in m8?

Exactly wat a got offered for a apprenticeship and it's a fair price

Its great when it starts **** now though just want to get back to work and make sum cash its all gone after all the drinkung and prsent buying but it wont stop me splashing 100 to 150 quid tonite hahah

merry xmas danny lad hav a gud one