Search results

  1. Mouldyoldspudgun

    Plasterboard on window/door frames - any advice?

    After another look it looks like you had plenty of room for it to be done properly, until he stuck the reveals, tell him to take them off, stick beads up and float and set it, if he uses sand and cement make sure he sticks the beads with it too and doesn’t top coat the same day. Then tell him to...
  2. Mouldyoldspudgun


    I know what you mean it’s the Bain of my life this predictive shite
  3. Mouldyoldspudgun


    And you can’t spell they’re
  4. Mouldyoldspudgun

    How to newly plaster walls after ceilings have been painted..?

    What on earth made you use Farrow and Ball especially before the walls are plastered
  5. Mouldyoldspudgun


    I expected a “ my name is Slim Shady “ after the Hi
  6. Mouldyoldspudgun

    Remove lining paper off lath and plaster walls and ceilings and re-plaster?

    It really depends what’s more important to you, a stable ceiling for you to live under or the cornice and ceiling roses which if they are original and not added at a later date will have most of the detailing covered by paint so probably would look nicer if replaced at a later date, being...
  7. Mouldyoldspudgun

    Correct or not correct??

    Hack it off and float and set it, should be done and dusted in a day
  8. Mouldyoldspudgun

    Easifill on inside of external wall

    I think someone’s stolen half his screws
  9. Mouldyoldspudgun


    I bloody knew it
  10. Mouldyoldspudgun


    I’m really not surprised
  11. Mouldyoldspudgun


    That’s what I thought it was about and seeing the sort of clobber @Vincey wears I thought it would be about H in particular
  12. Mouldyoldspudgun

    Cracking of wet plaster

    Here you go for all you non believers, just scroll down to the second page
  13. Mouldyoldspudgun

    Cracking of wet plaster

    Was your Pva dry? It’s meant to be tacky when you start when you put your multi finish on. Don’t believe all this shite about it re emulsifying read the tub and don’t wet it down to much either unless it’s for sealing the wall
  14. Mouldyoldspudgun

    Retirement gift ideas needed!

    I think you should make more videos of your escapades in the snow with a speed scimmer
  15. Mouldyoldspudgun

    Retirement gift ideas needed!

    I’ve got one of those my My Mrs bought it for me
  16. Mouldyoldspudgun

    Plywood and plastering

    Is your name pronounced arse whore?
  17. Mouldyoldspudgun

    Retirement gift ideas needed!

    Wasn’t @Marshy going to give you a sound thrashing once?
  18. Mouldyoldspudgun

    Insulating lime based plaster

    That took me by surprise, you recommending that gear
  19. Mouldyoldspudgun

    Questions from a weak plastering novice

    That’s a huge under statement
  20. Mouldyoldspudgun

    Questions from a weak plastering novice

    You can’t use @JessThePlasterer as a alternative to plasterboard
  21. Mouldyoldspudgun

    Splash brush

    Seven inch emulsion brush
  22. Mouldyoldspudgun

    Mixing drill repair

    If it sparks a lot and really bright it could be the condenser which is inside on the trigger or it may have come out
  23. Mouldyoldspudgun

    Is this acceptable-cornices and setting?

    Are you tiling top to bottom if so it’s okay as long as the cement board is straight as for the cove the making good is crap but you should be able to sort it with filler, which I hasten to add you shouldn’t have to
  24. Mouldyoldspudgun

    Plastic exterior Beads.

    You shouldn’t buy them from Wickes all their beads are inferior
  25. Mouldyoldspudgun

    Lime Plaster inside when cement render outside - worthwhile?

    50,000 how big is your house? Or is it a terrace of houses
  26. Mouldyoldspudgun

    Sponge coat.

    I get what you are saying and to a certain degree agree but price workers have pretty much always left a s**t job because the rates are not good on site.
  27. Mouldyoldspudgun

    Trowels getting to sharp!

    They get to flimsy and bend with the wall but they are still good for troweling in tight spaces or polishing as they end up like these flimsy polishing towels you get now
  28. Mouldyoldspudgun

    Basecoat waterproofing too strong

    I really can’t see why it’s slumping unless you wet the scratch coat down to much
  29. Mouldyoldspudgun

    Basecoat waterproofing too strong

    How thick is your top coat?
  30. Mouldyoldspudgun

    Show me the money.

    They have gone up around here too, which is quite pleasing
  31. Mouldyoldspudgun

    Morning burgers

    That will be someone phoning up, some t**t did it to me in Bexley Heath, bloke came out on a Honda fifty took a photo a give me a ticket, he told me someone phoned up about it because my wheel was on the path, obviously rather I blocked the road off that would have been okay, wouldn’t get any...
  32. Mouldyoldspudgun

    Removing Plaster Stains from Old Wooden Feature Beam

    Tell me you haven’t plastered the inside of an Inglenook fireplace
  33. Mouldyoldspudgun

    Not been paid (anyone had this)

    I’ve not had that, what’s the builders name that he gave you, we are in Medway so don’t need this t**t phoning us. Sorry Im no help for you but I definitely think the owner is in on it as he would have massive bells ringing over paying out eleven thousand and he has no contact address.
  34. Mouldyoldspudgun

    Advice for Garden wall

    Do better getting rid, it looks like someone started an extension and never finished it
  35. Mouldyoldspudgun

    Are any modern renders suitable for a solid brick home?

    If your surveyor is saying lime, you should really follow his advice that’s what you employed him for
  36. Mouldyoldspudgun

    Had a nightmare

    Why would you Pva Bonding? If anything if it’s been floated a while just wet it down, if not just scim it
  37. Mouldyoldspudgun

    Internal architrave molds

    f**k**g hell, cheer him up why don’t you
  38. Mouldyoldspudgun

    Internal architrave molds

    Still use the stuff
  39. Mouldyoldspudgun

    Wack !

    I think Wacks prices are to high anyway, they are a bit like Wickes sell you a can of paint for two p and charge eighty quid for a roll of masking tape. We just shop get most stuff delivered from online all different places cheapest not always the best just look at Wickes thin coat beads, like a...
  40. Mouldyoldspudgun

    Council house ceiling help needed please

    If you have trouble with water stains ever again, oil based undercoat will stop them coming through
  41. Mouldyoldspudgun

    2.5 years old lime render crumbling away... advice appreciated

    Did he take the old render off? Definitely not left long enough between coats (if he did take old render off), he has also used render stops to get the drip at the bottom, are they stainless steel?
  42. Mouldyoldspudgun

    Bathroom walls - undercoat/skim or render?

    Your right but it’s easier fo someone who doesn’t know what they are doing, if they have the space to do it
  43. Mouldyoldspudgun

    Bathroom walls - undercoat/skim or render?

    Your easiest way is to use tile backer board just batten your walls and screw it up, you need a flat, square and preferably level surface for tiles otherwise they will look crap. Never put fairy liquid in sand and cement, if the gear is to coarse as it is use plasticiser or lime
  44. Mouldyoldspudgun

    Tanking slurry on copper pipes?

    The Denso tape stays on, it’s to stop the sand and cement getting to the copper. If the pipes are exposed give them a good clean after the slurry coat which you should do any way