Search results

  1. S

    spray hardwall

    Living the f**k**g dream mate , why doesn't the Android app work
  2. S

    spray hardwall

    We eat better carrots down here
  3. S

    spray hardwall

    Hello fanny my mate ,
  4. S

    Best machine by far

    Yes mate , your right. You need a different gun for bucket coat and a bigger compressor.
  5. S

    Best machine by far

    No I'm not a pft dealer
  6. S

    spray hardwall

    I found that it kills the soft ones , just use a d63 on the 3phase and standard on ritmo , unless your spraying large rooms and areas , I prefer using the ritmo is better .
  7. S

    spray hardwall

    Still should be able to spray for a few hours , big bollox
  8. S

    spray hardwall

    No mate, we had lads following behind skimming , hand apply
  9. S

    spray hardwall

    You don't need to clean machine after 20 bags mate , we sprayed 120m , 40m a room and then clean the machine , the only mistake people mate is after a couple of days spraying, just take the pressure plate off and clean it out as the hardwall builds up in there, it happens with MP75 as well...
  10. S

    Best machine by far

    No Andy , I moved and decided I would leave it all to the big man . I'm happy just doing a bit of machine work. I still repair some people's machine in Devon . Been using a ritmo lately and forgot what a cracking machine it is . Did 850m of hardwall with it and now spraying parinter . Irs so...
  11. S

    Wheres that G** t**t fanny man

    I knew that would bring all the T***s out of the woodwork but it was funny
  12. S

    Best machine by far

    I am because I don't have any links to Pft or make any money from PFT .
  13. S

    Wheres that G** t**t fanny man

    Anyway, I got pusy needing a good seeing too so speak soon you old t**t
  14. S

    Wheres that G** t**t fanny man

    When they let me out of the nut house but I'm f**k**g madder than I was before so I might be banned soon ,like Ii give a duck.
  15. S

    Weber Monocouche - should it REALLY look like this?

    Lol, contact Weber and all they will do is blame the renderer. The builder will just paint it .
  16. S

    Wheres that G** t**t fanny man

    That's the best place mate, long time . How are you , you lot c**t
  17. S

    Best machine by far

    I have used most machines and in my opinion the PFT machines run all over the rest of the s**t out there . The ritmo is out standing and the back up is second to none .
  18. S

    Wheres that G** t**t fanny man

    This place is full of want a be plasterers . Crook of s**t . Where is that knob fanny man . Anyway , where's that bottle of red . Machines will put all you f**k*r out if work soon . Lol
  19. S

    Parex EHI through a Diesel Machine

    I have sprayed 1000s of m2 with EHI using the PFT g4 and 5 . Even used the ritmo . Never had a problem. You just need to be aware it will stiffen up quick .
  20. S

    Give young people a chance

    AT jones of Portsmouth are known for it, when you question them they say that it's in the contract order . We had a fight to stop them because we are registered . They even tried to say we would need to claim it back from citb .
  21. S

    Ritmo 110v 'issues', ....keeps cutting out. Help please

    I would try a different transformer to rule it out
  22. S

    Give young people a chance

    A lot of firms try and take it which is a piss take.
  23. S

    Give young people a chance

    No due to how our sub contract labour invoices we don't
  24. S

    Give young people a chance

    Will do it it through whoever as long as it don't cost me
  25. S

    Give young people a chance

    Geason , how can I be dealing with the wrong people, I spoke to there apprenticeship side.
  26. S

    Looking for work with a spread

    It worked fine Danny before all this bullshit, if you couldn't do the job you didn't last , end off. Now the card carrying idiots drift from firm to firm making a pigs ear where ever they work . It's a money making exercise for the government . You work out how much revenue they will get from...
  27. S

    Give young people a chance

    There quick to send there levy bills out
  28. S

    Give young people a chance

    I called the citb, as we are registered. They didn't want to know , told there local man to me will be in contact, not a bloody word . Complete joke
  29. S

    Looking for work with a spread

    I blame the cscs card system, I have been plastering for 30 years. Never done an nvq in my life. When I say plastering, I mean , floor screeds, render and set, coving . Not just bloody skimming , how can they call themselves plasterers. All you see now is card carrying little know it all who in...
  30. S

    machine wanted

    Never use anything, if you know you machine and gear it should happen .
  31. S

    machine wanted

    The answer is, don't block your hoses . Can't remember the last time I had a blockage
  32. S

    machine wanted

    Bend over nick and Stuart will give you a demo
  33. S

    machine wanted

    When stuart is involved mate, there is always food very close .
  34. S

    machine wanted

    I mean scrap not scan.
  35. S

    machine wanted

    We sold that for scan ages ago nick
  36. S

    k-rend

    I just had one , 260m2 , wouldn't change at first , the parex rep couldn't budge them but a few well dropped hints about krend and explaining that it makes no difference to me which I use cost wise, but as a professional , I wouldn't advise not to use a product unless there was a good reason .
  37. S

    k-rend

    I will always try and turn the customer to another product like parex, I just tell them to search the net if they don't believe me how troublesome k rend can be.
  38. S

    machine wanted

    Speak to stuart lee, you know we will sort you a good deal with second to none backup. As you know, we don't only just sell the machines, we use them everyday in our sister company.
  39. S

    Ritmo M 110v , Honda 6 Kva gene , rendering setup , skim set up

    I could setup the g4 spray on and clean out before you even started laying on by time you have loaded up your bags. Carried up your kit. Water . Tubs . I have even run the machine out of the van .
  40. S

    Ritmo M 110v , Honda 6 Kva gene , rendering setup , skim set up

    A lot of people buy a machine and expect the work to come flooding in, you have to change your mind set and go for the work that makes the machine viable . I get the machine out to put on 10m2 rather than putting it on by hand .
  41. S

    accelerator

    I would be very careful about using third party accelerators . If anything goes wrong with the render your giving the manufacturer s every reason to walk away and say not our problem .
  42. S

    UK Plastering Machines

    Thank you mate . We always try to our best .
  43. S

    Renderer

    We have a lot of mono render in andover to be done before Christmas. We are looking for gangs who are interested . It's all new work using parex . Anyone interested email me at paul@ukplasteringmachines.co.uk
  44. S

    k-rend

    We don't and unless you are compitant using one then there's not many who do will due to the damage that someone who doesn't know what there doing can do.
  45. S

    k-rend

    That's using a machine
  46. S

    k-rend

    Anything from 60m2 to 130m2 so will do more but most will do the above .
  47. S

    Looking for a start

    His post does say own transport . Lol
Top