Search results

  1. S

    Ritmo for sale

    Only trying to buy a machine
  2. S

    Ritmo L turbo for sale

    Where abouts are u ? As I will come and check it out
  3. S

    Ritmo for sale

    There decent for mono my mate uses one all the time
  4. S

    Ritmo L turbo for sale

    Hi u still got the machine? And u wanting to sell it ? Are they any good etc ?
  5. S

    Ritmo for sale

    Hi , where abouts are u in the country? How much u want and will it do Webber mono? Without it messing up all the time
  6. S

    Advice on monocouche

    I have the same problems as u, hand applying with 15mm beads, have u sussed out a good method?, it’s a pain in the arse but have found if u apply a coat and bed the mesh in then go over that with another coat and rule as flat as u can , then top an hour or 2 later etc, tricky product but we done...
  7. S

    Helpppp needed

    Absolutely spot on, and the house 100% needs plaster taken off
  8. S

    Had a nightmare

    When u pva before bonding it must have dried fast the pva. So that meant the walls where high suction, u should have gave it another 1 before the bonding, some old houses have lime in the original plaster, if u see loads of hairline cracks everywhere that’s normally a good indicator that the...
  9. S

    M-TEC M200 FOR SALE

    Hi, how good are the ritmo? I’m interested in one but do u have to keep taking them in for maintenance ( repair ) etc
  10. S

    Terrible job of Parex monorex v10

    That is a poor job. And not finished correctly
  11. S

    Hand balling mono - best methods to apply

    Sorry , in the summer scratch same day, winter a problem
  12. S

    Hand balling mono - best methods to apply

    , forget the machine I’ve done a lot of mono by hand , but I like a pukka job
  13. S

    Monocouche finishing trouble

    Hi thanks for getting back, how would u go about it ?
  14. S

    Hand balling mono - best methods to apply

    Handballing monocouche but always seen to have a few issues with it, if anyone could give me some good info I would appreciate, I prefer it in the summer as in the winter I tend to put on in the afternoon and aim for around 8mm , I serrate it then spat it . Then the next day top it, think I...
  15. S

    Monocouche finishing trouble

    I’m having issues with monocouche too. With 15mm beads a bit of a nightmare, started to put a coat on around 6-8mm bead some mesh in , then smear over the top of that, then rule it serrated and get flat and fill hollows , let that pick up for an hour , then top it with another coat and serrated...
  16. S

    PFT G4 Plastering Machine for sale

    Looking for a spray machine used , Ritzmo preferred
  17. S

    crappy rendering sand

    If sand no good u don’t have a chance
  18. S

    crappy rendering sand

    Where u get your sand from ?
  19. S

    crappy rendering sand

    They don’t have a clue tp about the grade of sand etc. Annoying as it made a recent job look bad I had to re-do. Makes me laugh on here all these lads asking about 10mm or 15mm beads for scratch render. Work clever lads mix up wet your mono and put on tight and bed your mesh in . Then start...
  20. S

    crappy rendering sand

    Yes mate, has a few issues with sand lately, I’ve asked them at tp what quarry they getting it from,clueless. Pissed me off as it made my work look bad in the sun
  21. S

    Used my new mediflex today

    We just put on around a bag an half give it a flatten then mix up to 2nd coat , that’s for one man , how much u mixing up for yourself ?
  22. S

    Used my new mediflex today

    Thanks for your help will give it a go Tomoz
  23. S

    Hi Jamie here - new to the forum, In need of serious help with rendering dilemma (1880's solid brick wall)

    Insulation render is expensive but u can get cheap insulation boards but the spec on them ain’t as good as the more expensive , tell your mate to dot and dab them on and get as level as he can , lay them long ways and staggered joints , once dabbing has set he will need an sds drill and drill...
  24. S

    Used my new mediflex today

    So once u have 2nd coat on u 1st flat mt then medi 2 wet trowels then a crosstrowel ? Sorry to ask but we been having problems with them
  25. S

    Used my new mediflex today

    Or is that a wind up 5 trowels ?
  26. S

    Used my new mediflex today

    Cheers buddy , so soon as flat with mt , don’t leave it and straight on with the medi 2 wets and then just keep trowel clean ? That about right
  27. S

    Used my new mediflex today

    Ok will give that a try , thanks anyway
  28. S

    Used my new mediflex today

    Once u got 2nd coat on do u flatten with my 1st ? Or is it medi all the way 2-3 flats( trowels ) ?any help would be appreciated
  29. S

    Used my new mediflex today

    We have had them for a while , but we can not Seem to get our walls looking good at all, when they dry it looks like we have chucked loads of water at the wall and flattened , but we used none ,
  30. S

    Used my new mediflex today

    A lot of lads are saying they are brilliant , but I’m either using wrong or there finish ain’t upto scratch
  31. S

    Used my new mediflex today

    Never had so many problems ,we have tried leaving it going on it early etc , might use it to put on with it as it’s shite I think, prefer super flex all day long
  32. S

    Used my new mediflex today

    Once we have 2nd coat on we 1 flat mt, then nela but not keen , not got a clue what we are doing wrong but very annoying
  33. S

    Used my new mediflex today

    We can’t work out how to use the things , tried different methods etc but not happy , but most lads are using them , my mate uses them with tarter but I’m not a big fan of that stuff
  34. S

    Used my new mediflex today

    Hey up mate , u seem to know about these nela medi , we have had nothing but problems with it so hopefully u can help us out inwhere we are going wrong, been drying real bad
  35. S

    Ritmo for sale

    We get from Sheffield Markham now , but might buy one of them Ritmo as I don’t want something to big
  36. S

    Best machine by far

    Sell it to me then I would be interested as I’m after one
  37. S

    Ritmo for sale

    We had a nightmare with the stupid thing , kept cutting out every minute , totally messed us up and the job as it was big , put me off them for life , my mate had one aswell and got rid
  38. S

    30’s house plastering - help !

    Either get a Plasterer to plasterboard the wall and skim , or build a stud wall either timber or metal then insulate if needed and board and skim
  39. S

    Best machine by far

    Are they any good ? Never seen one used , I’m not after g4 etc to big for the van and a lot of money left in the van overnight, I just handball mono but it’s a nightmare , do u get many problems with the Ritmo ?
  40. S

    Best machine by far

    Hi , u selling your Ritmo by any chance ?
  41. S

    Nela ss premium

    Think a lot of spreads are thinking the same mt all the way , to be fair though we do rate the refina plastic
  42. S

    Stilts

    Cut some celotex slightly bigger than your foot and tape it round your boots works a treat
  43. S

    Eze mix, Eze24 compressor etc FOR SALE

    There is money in it but u need to be working with the right people ( gang ) and forget the sites they pay u peanuts
Top