Look bud, I haven't got the foggiest what your problem is.
Is it because I don't spend every night on here, or maybe I don't laugh at you poor jokes or kiss your arse like some do on here.
If you don't like the threads I start and the contributions I make DONT Waste your time reading and replying.
Got offered £6 Board and skim other day in glossop, but don't touch site work anymore.
Use to do between 40-60m2 on site per day but mostly struggled to get the area in front of me to warrant going hard.
Done 100m2 days once or twice (4 gauges, 14 hour days) in 13 years but I have never met a...
Agree with @Pagey, even the best of us have the odd mark here and there.
Filler is extreme but a little sand paper in your back pocket having a quick look around after the mist coat is normal, I did it on my own house and advise customers to have a quick check around and gently rub out any...
K rend won't guarantee over any painted surface so if your wanting a warranty from them they won't give it, scrabbling is a ball ache.
Look at Parex, they do a base suitable for painted surfaces Maite or parinter, 1 or the other.
Happened at 10pm Wednesday playing football, It looked a fooking right mess, right leg knee right round to the outside.
Laid in Rotherham for 3 hours, begging for the doc just to snap it back in, horrendous unnatural pain while out, lifted my leg and just twisted it all back in, felt great...
Got an urgent job booked in for next week with customer desperate to get it done.
Very small only about 8m2 of cement board, then nivoplan (base) 10mm full mesh and topped of with tonachino plus 1.2mm
Can't do it myself as Iv just dislocated my kneecap and can't risk it.
Jobs in dronfield...
Just sprayed today which was a mistake and have gone for overnight.
Should be ok, but Silicone K1 needs a clamp able rotor and stator as it's just chewed a near brand new R&S up on my ritmo.
Sprayed Parex since last August no problems what so ever first k rend job and it's just done that...
Remember I did a thread on it and spent near £100 and fooked it off, winter time we slow down so I use it to try other ways of work.
Took the piss to be honest, paid £13 to drive to the other side of Sheffield at 7:30pm to price a 2 storey extension.
She had had about 4/5 quotes as you can see...
word of warning if you are looking at having a website, get your pictures watermarked or have a banner, vis vest or work t shirt in the picture, anything, just to stop people stealing them.
regular occurrence for me now.
had a guy half a mile up the road take a lot off my site, i had to ring...
We are staying away from weber at the moment due to being "told" they have added more cement to the pral m to speed up setting times, how true I don't know as Iv heard a lot of BS of late.
Was very brittle last time we used it about 8 months ago
When the customer is fit
When the customers daughter is fit (18 +)
When the customer fires up the old tassimo to mash
When the customer brings cake (biscuits are so so)
When the customer goes out and leave you alone to crack on
As above, but points to the kettle first
Sticky scrim that doesn't...
Lumps in plaster
Those joists on overboards that just disappear
Customers who worry
Customer that stand behind you
Customers that try and work out your day rate
Customers that think they can board
Customers that think...
Iv been directed to sig for the boards which are the exterior aqua panel knauf.
Would be screwed into ply (studded) then eps dabbed and pinned, still not enough?
The ply would take the weight with fixings straight through, not the actual board, which would only act as a membrane and a sound...
nothing to do with me mate, i am Qualified EWI NVQ 2 and used the work for a fairly decent sized EWI and mono company, learnt most but still if doing a job with a guarantee to spec id have the reps on site as much as possible, we priced a Mapei EWI job up the other month and i needed support, no...
the kids got a point, and i can't be arsed with another argument @Jgreenplastering if you want to take it down that route, lets just get that clear.
If you have any questions regarding an EWI system that your fitting to spec, here is not the place to ask, ring Parex and speak to your rep and...
Do not give out any numbers until you've seen with your own eyes and touched the areas with your own hands.
What you think will be a quick couple of ceiling will end up being a house with no parking, cream carpets throughout, on the top floor of a 3 storey house that need boarding over first...
I am put in this situation 2/3 times a week, the most favourite one at the minute is this little beauty
"We want our house rendering, it number 21 smith road, if you look on google maps it's the one with the red car on the drive, how much would it be"
My advice is go and view it, it could be...
I think they have got a little worse over the years.
Domestics use to be great, in and out, nice and clean with some good money to be made if you could get the continuity of work.
Now it seems some think they have you by the bollox and will dance to what tune they play, not all just some.
why did you leave a sample with them.
i left a small sample with a guy a few years ago, didn't get the job and drove past to see they'd had it rendered the same as the sample was.
never leave anything, iv had people try it but won't do that again.
i know mate, not all doom and gloom but when quiet i just rant on here, get s**t off my chest, makes me mad some of the dickheads i waste my time with, when good i don't brag as i don't like to make other who are short feel down.
yes the missus is ok, thanks
it amazes me how some people don't appreciate your time and are just damn right fooking rude about it.
i priced a job the other week, when we had that really bad weather, i priced 6/7 in one day, it was getting dark and absolutely smashing it down.
1 guy gave me the wrong post code and was at...
its silly season mate.
had the same myself, 1st render job due to start next week, can't do it now as road is being dug up, tried to bring another forward and they can't do it because they done get paid till end of months and can't afford it.