Search results

Hi lads Instead of putting 2x coats of ecorend x32 with mesh embedded in the 1st coat then a primer then silicon topcoat Could you put base coat of k11/ rend aid with mesh then top coat of x32 followed by primer and silicon top coat I was looking at doing this as the bricks are not the best...

Can any1 tell me the closest colour match for K rend thin coat silicon in colour linen What would it be in weber pral m scratch finish Cheers

Been sent this pic not seen the job iv been asked to render like this to me it looks like tyrolene but it's look really thick any ideas

Would k rend monocouche be ok to put on at 5pm and rub up at 7am the next morning at this time of year in this weather Cheers

Been happing probably over the last few months when trowling up with a bit of water little patches of skim just drag away like the 2nd coat is coming away from the 1st coat if u try filling it it keeps dragging away only way it seems to get rid of it is to take of the plaster back thinner to...

Is k rend general purpose mortar the same as Weber ocr render And does it get applied the same Ocr can be applied in 1 coat application can the k rend or does that need scratch coat 1st then top coat after thanks

Hi has any1 rendered a swimming pool on the reinforced foam blocks Iv been told it's a 2 coat acrylic render with with render mesh but would they need a primer of key coat 1st And any advice on the best products to use Cheers

1st time of using this today mixed as told on the bag started to apply the plaster and it was full of about 3 mm to 5mm grit so chucked that mix cleaned everything then mixed another bag same thing again grit again totally impossble to spread it smooth grit just pulling through the skim The...

Iv got 2 4 bed houses ready now to skim on new plasterboard Jobs in sedgley Email if ur intrested neilsmart2@hotmail.co.uk Cheers

Any1 ever used renderlite renovating How is it to put on Whats it like to skim on Cheers

Looked at a job today some 1 has tyrolened straight on to the block so I need to re render with ocr then tyrolene again can I go straight onto the tyrolene or does it need a stabilising primer 1st Thanks in advance

I need a few new 2 bed houses skimming for me in Oldbury if any one is interested good run of work and probably more in the future just want a nice tidy job and done right no chancers or rough arses Price is £2.70 per m2 Email me on neilsmart2@hotmail.co.uk

Iv got a job half brick and half ply he wants weber pral m coloured render Is it possible to mesh and rend aid over both the brick and ply then top with the coloured render or would it be best to use stainless steel mesh on the ply then rend aid

I'm looking for 6 bags to finish a job of

Iv got 2 small flats and a stairwell to skim in Stafford on new plasterboard on day rate probably about 5 days work for 2 spreads Email if interested with details and what ur day rate is on the books thanks

I'm looking to take some 1 on who is willing to learn with a bit of experience would be nice but not essential some 1 in an apprentice scheme would also consider thanks

I need a chuck on a job to board some new houses in front of my lads all square easy houses 8ft high £2.40 m2 price to tack and dab £1 m2 to insulate just toilet and wc walls and soil stacks There are 11 houses to do just depends on builder if he pulls his finger out whether it's will be a...

Just wondering what the rates per m2 are being paid around West midlands on normal 8ft high timber stud and what the prices on dab thanks