Search results

  1. C

    Trowels...

    Use your Marshall town to get it on and flat then finish with a refina super flex 16” easier than finishing with a marshal town. Refina takes couple of weeks to wear in but when it is it’s nice!
  2. C

    new mason in town

    Decorations? Or decorative!? :oops:
  3. C

    Make good .

    The orange stuff just Seems better for some reason. Doesn’t always fray down the 1 side!
  4. C

    Make good .

    Ye mate I agree, If you start putting it on thick in places than others it’s seem to not like it. 2mm thickness all over. I haven’t gone straight over artex with it, I gave a artex Ceiling a tight coat of bonding, then skimmed onto the bonding.
  5. C

    Make good .

    Na mate 2 coat as normal, didn’t all show through, just happened a couple of time’s in a couple of patch’s. So from then I have just filled out to make sure
  6. C

    Make good .

    That’s a tricky 1 but let’s go with old!
  7. C

    Make good .

    :LOL: :LOL: There are some right miserable old gits on here.
  8. C

    i survived again

    I thought it was sausage up a motorway :LOL:
  9. C

    Make good .

    I’ve commented on loads of other threads mate. This just happens to be 1 that iam getting asked questions on
  10. C

    Make good .

    Ye if there’s any hollows fill them first aswell, no don’t Need to let first Coat go grey. Once everything filled let that pull in for 15, then treat it as BG then once you have given it a flatten or 2 after 2nd coating so it basically looks finished, wait till it all changes colour, flick/spray...
  11. C

    Make good .

    Ye same process, just make sure fill out scrim and beads first, specially the orange or blue scrim because sometimes can show through the white finish
  12. C

    Make good .

    2nd batch basically is mate. They have just massively f**k*d up with that first batch, now most people are put off because how horrid that first stuff was. They need to turn it around some how cus they will f**k it off because they ent selling enough and then every1 will be relying of BG again!
  13. C

    Make good .

    Is that b and q?
  14. C

    good morning

    It was fine for me mate I just treated it as if it was BG. Worked the same. Just a good flick of water when it changes to a grey colour.
  15. C

    good morning

    U still not used the new batch yet hstoke?
  16. C

    Get ready for plaster sale

    Just what we have all been waiting for. Think there’s going to be a lot more with garage fulls! Karma!
  17. C

    Get ready for plaster sale

    90 bags all out of date! :LOL: :LOL:
  18. C

    I’m a Courior live in Birmingham have been delivering plaster an plaster boards for a company in Birmingham

    Because if it was any good you would be handing out a few free samples! It’s a Blatant con!
  19. C

    Make good multi skim any one managed to get any sort of consistent finish

    What was wrong with the board adhesive?
  20. C

    I’m a Courior live in Birmingham have been delivering plaster an plaster boards for a company in Birmingham

    He probably brought pallets of the 1st batch of make good thinking he would cash in cant sell it. Repacked it selling it £12 a bag :LOL:
  21. C

    Make good multi skim any one managed to get any sort of consistent finish

    Apparently the how to video was meant for the new formula! And the formula got messed up somehow hence the first batch being shite. With this new formula that’s out now follow the how to video and u can’t really go wrong
  22. C

    I’m a Courior live in Birmingham have been delivering plaster an plaster boards for a company in Birmingham

    Iam in birmingham, where’s The place selling it? I want 1 bag for free to try.
  23. C

    I’m a Courior live in Birmingham have been delivering plaster an plaster boards for a company in Birmingham

    It was half believable until the 20 pallets part, then u lost me :LOL:
  24. C

    Crumbling Cinderblock?

    Wet it up with brush to get rid of any dust, use bonding coat to fill in hole and bring it out to thinkness of the wall. When it’s dry put skirting board on. And if the skirting board doesn’t cover all the damage area use some easifill then sand it
  25. C

    Make good multi skim any one managed to get any sort of consistent finish

    Ye used it on a over skim aswell.
  26. C

    Board finish over blue grit

    :LOL: Iam ok thanks the wand
  27. C

    Board finish over blue grit

    :LOL::LOL::LOL: Who the fucks this guy!!
  28. C

    Board finish over blue grit

    haven’t u just given The same advice that every1 else has said (control the suction)!!! :rolleyes:
  29. C

    Make good .

    Haven’t people been saying for years BG need to have competition. MG does need tweaking but it’s competition For BG at the end of the day! u can get a nice finish with it basically the same way you finish BG. And after all this BG bullshit if I have to drive to 5 merchants to get BG and 1 to get...
  30. C

    Board finish over blue grit

    I was thinking the same every1 seems to love that s**t on here. Think I have used it twice ever!
  31. C

    Make good .

    Yes mate
  32. C

    Make good .

    First time I used it, it seem to take ages to set, I added a few handfuls of cement the second time took an hour, I would only by there quick set bonding now
  33. C

    Board finish over blue grit

    Don’t Even need blue grit, few coats of pva on the day. Or if u can pva it day before then a coat of pva just before you put it on.
  34. C

    Make good .

    Ye just not as much
  35. C

    Make good multi skim any one managed to get any sort of consistent finish

    Think that’s first. 3/11/2020 onwards is second
  36. C

    WHERE IS THE PLASTER?????

    Until they get a delivery of more than 4 pallets at a time it’s going to go on for a while.
  37. C

    WHERE IS THE PLASTER?????

    That was the Monkspath 1. Same thing happened At Tysley 1 aswell delivery 8 in morning gone by 10.
  38. C

    Make good multi skim any one managed to get any sort of consistent finish

    Why would u shine a torch down your walls ??
  39. C

    Make good .

    Ye that batch was bad!!!
  40. C

    Make good .

    Iam Putting same amount on that I would with BG. I’d say do something with the formular make it creamier and it would be nicer to spread on other than that it’s ok.
  41. C

    Make good .

    :LOL: Na quick coat of bonding then skim it. Looked nice in the end anyway
  42. C

    Make good .

    Ye was only small ceiling wasn’t sure how the stuff would go straight onto the artex. Had only used it a couple of times by then
  43. C

    Make good .

    I use the same gear
  44. C

    Make good .

    No, I put 1st coat on, then go back and flatten that, then If it’s on board I leave it 15 mins. 10 mins on a overskim. Then second coat
  45. C

    Make good .

    I used the quick dry bonding onto the artex first then the Skimmed over that with it
  46. C

    Make good .

    Using the same bucket of stuff to second coat 1 n half-2 hours. (Depending on background)
  47. C

    Make good .

    Yes mate got sick of chasing around for BG. Customers are liking the finish aswell.
  48. C

    Make good .

    Haven’t they always had the yellow sticker on?
  49. C

    Make good .

    Lol! Apology accepted :LOL:
Top