Search results

  1. madmonk

    Product advice please

    Could use a r7 primer then hp12 then krend do a colour dash reciever if thats whatvyou mean
  2. madmonk

    Tapit dead!

    Living in a box
  3. madmonk

    Advice on wall prep

    If your soundproofing at least use sound coat before dabbing but still wont do much i normally build a metal wall with acoustic insulation then resi bars then 2 layers of sound boards no joints overlapping and sound seal around perimeter
  4. madmonk

    Bullnose to 90’

    Hold a rule up square off or angle bead if smallish bullnose bond in or if you have plenty of margin on window dab a 9mm board on the fill in the skim bead
  5. madmonk

    Domestic dilemma

    Stop mithering hehe
  6. madmonk

    Domestic dilemma

    Just scutch the cnut where your gonna dab and board it job done now get fcuked
  7. madmonk

    Domestic dilemma

    There is no key on that blue s**t whatever it is take it paint skim looks massively thick aswell hence should have a tight coat of bonding
  8. madmonk

    Domestic dilemma

    If the floated wall had been painted or not keyed up should have been blue grit its just shelled off not only that i would have give it a tight coat of bonding first
  9. madmonk

    6mm render beads

    Thanks pal
  10. madmonk

    6mm render beads

    Hi peeps is it ok to use 6mm beads on blockwork for hp12 then silicone on top or will it ghost thanks
  11. madmonk

    Depression

    Depressing bellend is that cos your a miserable yorkshire cnut
  12. madmonk

    Level 5 mixing paddle

    Anyone got one or used one they look a mean bit of kit
  13. madmonk

    13 or 14 trowel

    Ive got one cant get use tl putting on with it though
  14. madmonk

    13 or 14 trowel

    I mean curved from the toe down to the heel that way wernt they brought out for doing jointing an taping hence the curve to push the tapes in
  15. madmonk

    13 or 14 trowel

    Arnt them permashapes bit of a bend in the blade or have they changed em
  16. madmonk

    Advice on plastering a curved ceiling

    Plastic trowels/sponge/and a good skill set
  17. madmonk

    13 or 14 trowel

    Is it the 5 inch wide one mate
  18. madmonk

    13 or 14 trowel

    Are they 5 inch wide yours the one i used today was 4 3/4 wide felt good though
  19. madmonk

    13 or 14 trowel

    So generally use a 14
  20. madmonk

    13 or 14 trowel

    Tried a marshy 14 inch today felt quite nice ive always used 13s just wondered if anyonecelse has switched sizes an found it better cheers
  21. madmonk

    Collomix cordless mixer

    You will be right with dewalt my son has just got one looks good ive not used it yet though
  22. madmonk

    Collomix cordless mixer

    Or look at the metabo 18v german again good quality
  23. madmonk

    Collomix cordless mixer

    Thats good for a quality machine
  24. madmonk

    Mixer

    Ive got a british airways cock juggling thunder cnut drill 6000w for half bag mixes spins it out the bucket its great
  25. madmonk

    Collomix cordless mixer

    Ive got plenty of powered mixers mate want a cordless
  26. madmonk

    Collomix cordless mixer

    £479 for the collomix 2 battery 18v and 5.4 amp
  27. madmonk

    Collomix cordless mixer

    Herad that the collomix is good just wanted a review on it wete mainly skimming so not smashing dri wall around with it
  28. madmonk

    Collomix cordless mixer

    Ive just started 16 new builds no 110 even yet fckin miles away were on a genny but a pain in the dcik rather just pull a cordless along ???????
  29. madmonk

    Collomix cordless mixer

    Has anyone got or tried one of these just wondering how they compare with the new dewalt cordless cheers
  30. madmonk

    Bungalows

    Nice mate where abouts near mcr
  31. madmonk

    taping and jointing

    3 featherd out each time an paper tape
  32. madmonk

    Ocr

    Takes up pretty quick too
  33. madmonk

    Ocr

    Its like a 6-1-1 mix
  34. madmonk

    Ox trowel

    Now fcuk off to bed an get some kip
  35. madmonk

    Ox trowel

    Would not put on with one of them wobbly trowels ever might do a final pass with it an thats that
  36. madmonk

    Help

    It needs a stabilising first then grit or board ya cannnnnt
  37. madmonk

    Flattening first coat

    Does anyone do this or is it a waste of time just wondering does it really stop striping
  38. madmonk

    Is this guy to be taken seriously?

    No doubt he is mate im prob a bigger dick than him:oops:
  39. madmonk

    I’ve dropped a Ball lock

    Shouldnt laugh :risas:
  40. madmonk

    Stick render boards

    Metal gypliner you can pull em in an out mint for jobs like this
  41. madmonk

    Silicone 1.5

    Cheers pal its well primed aswell mate always prime me its wetherby 1.5mm
  42. madmonk

    Silicone 1.5

    How long does this take general to dry before its safecfrom weather got some to do but bit hit an miss this week cheers
  43. madmonk

    Patches in Monocouche

    First pass skinned over scratching back to your first pass probably common problem in summer by hand
  44. madmonk

    Silicone 1.5mm

    How did you apply the silicone to the top first or just put it all on in one
  45. madmonk

    Silicone 1.5mm

    I know what your saying mate this job is for my sons friend an she knows ghe score its all being tanked behind the wall an like i said i cant give any gaurantees as regards the top ive told em about the copings
  46. madmonk

    Silicone 1.5mm

    Ive warned them about having copings on but they want to stay with it like this
  47. madmonk

    Silicone 1.5mm

    For what mate
  48. madmonk

    Silicone 1.5mm

    this is it
  49. madmonk

    This is what were on at the mo

    Ive worked for him for years hes sound wont cut any corners either wants everything bang on aswell which is a first
Top