Search results

  1. scottcurtis484

    P1 d6 3 rotor

    Ayup guys anybody know how the p1 d6 3 orange twister rotor handles k1 silicone. Cheers for any info . Also usually use soft one works a treat .
  2. scottcurtis484

    generater messing up

    ayup pal iv checked the connections at the back seems to be ok no loose ones or damage ill double check tho for sake ... the machine jenny are like new quite esy to determine damage anywer but also new to machine life and problem cud be in front my eyes . nice 1 tho
  3. scottcurtis484

    generater messing up

    actually take it back not genny its machine ... not spining in forward mode and seems to trio genny as soon as start it up
  4. scottcurtis484

    generater messing up

    ayup iv had problem today with generator which runs fine no issue just wen turn on my machine it trips instantly . if any1 knows anything . much apprciated
  5. scottcurtis484

    air valve problem

    it was a regulater switch just before the air outlet needed adjust to work at lower pressure because i found out later a seal was worn a little bit when i submerged it in water i fixed seal and adjust the switch back to normal unfortunaly my friend was there to hep me out who knew wat to do tho...
  6. scottcurtis484

    air valve problem

    thanks for any info any1 can give
  7. scottcurtis484

    air valve problem

    ayup lads. anybody any clues why my air shut off on gun wen turning back on only sometimes re starts up the machine ... randomly sometimes starts otherwise need to press green button start manually . im using eze k4+ ....for me is a very good machine aswell very good performance other than this...
  8. scottcurtis484

    Terrible Rendering competition

    haha quality looks like gemma colins backside
  9. scottcurtis484

    training

    ayup mate.. just wanted to ask about the diff r+s i.e the one with tongues and claplable ones . at the moment im using one with a tongue and seems to be in a metal casing. the lads i got machine off got that 1 from p1. after the bits u pointed out to me in previous chats i have had the machine...
  10. scottcurtis484

    r + s info

    music to my ears mate cant wait to go to work
  11. scottcurtis484

    r + s info

    cheers mate very useful info for me there i have heard a few bad things about spraying silicone it can be a nightmare 40m2 and go funny. iv got a couple parex jobs to do atm so hopefully it runs smooth . thanks tho big bish
  12. scottcurtis484

    r + s info

    do 2 coat in this wet mix flaten 1st and leave to pick up on 2nd before ruling it is wat im aiming far nice and wet .
  13. scottcurtis484

    r + s info

    thanks pal good sense talk there . i did have it really wet iv just got home today from rubbing yesterdays and found some chunks of bag in the wall maybe this jammed it up ? but thanks for tips m8
  14. scottcurtis484

    ayup guys

    im not sure about trap door not seen 1 be good tho to have 1
  15. scottcurtis484

    r + s info

    i put it reverse mode listening to a friend who didnt know what he was saying tbh .. i spoke to andy from p1 very helpful it cliked a few things from past experiance. used a ritmo l before and think i do need the training for the k4 .
  16. scottcurtis484

    r + s info

    yes mate say p1 k4 plus edition on it payed 6500 for job lot like new
  17. scottcurtis484

    r + s info

    top man .. i know im wingin it more than id like to i should come down . id much apprciate the advice on filters as today it did go wrong at the last couple m2 and as can imagine i was doing allsorts and render did at 1 point go in to flow tube
  18. scottcurtis484

    training

    i drove down that way at weekend and was 9 hour round trip with all road works and things along the way i was looking for some where up north ... if all fails il have to drive again
  19. scottcurtis484

    ayup guys

    cheers pal i thought if same goin in leave the minor amount in bottom . need a hoover for other times i guess ?
  20. scottcurtis484

    training

    also its a k4 i can start it spray it and stop it clean it and understand to a extent just need pointers on filters and wat the valves are as im ot clued on all that . all help appreciated u guys are a good lot .
  21. scottcurtis484

    training

    ayup does anybody know where or who could give machine training near manchester . pft nothern booked for 5weeks .
  22. scottcurtis484

    r + s info

    i bought machine 2nd hand but is like brand new new model
  23. scottcurtis484

    r + s info

    ok sound i have that installed at the moment .. today was 1st day of using that machine(k4) it all went smoother than expected is ther a instruction booklet available as i need to know where things like filters are and other little bits .
  24. scottcurtis484

    r + s info

    nice 1 pal
  25. scottcurtis484

    ayup guys

    no mate near blackburn . but we still say ayup
  26. scottcurtis484

    r + s info

    which is best r + s for k4 to use with k1 silicone and monerex gm also ? anybody enlighten me plz
  27. scottcurtis484

    ayup guys

    1st machine owner ...eze k4 any tips about
  28. scottcurtis484

    Anyone Leaving Weber pral m overnight

    im doin full day putting on then full day rubbing at the moment with k1 and monerex and its goin very smooth .. its gunna be a cold 1 this year .
  29. scottcurtis484

    hello im new

    not freytend of abit a graft
  30. scottcurtis484

    Ritmo set up coming up for sale.

    looking for ritmo l in 1 weeks time . if all in good nick will leave deposit . based in lancashire dont mind travel
Top